相关论文: Patterning of diamond like carbon films for sensor…

Characterization of diamond-like carbon (DLC) coatings at cryogenic temperatures (down to 77 K) is presented, covering the electrical resistivity range of practical interest to gaseous and liquid particle instrumentation: 10^-1-10^5…

We have developed capacitively-transduced nanomechanical resonators using sp$^2$-rich diamond-like carbon (DLC) thin films as conducting membranes. The electrically conducting DLC films were grown by physical vapor deposition at a…

Diamond-like carbon (DLC) coatings have excellent mechanical and tribological properties, as well as good wear and corrosion resistance. They are well established in medical, metalworking and automotive applications. However, further…

The present generation of Micro-Pattern Gaseous Detectors (MPGDs) are radiation hard detectors, capable of detecting efficiently particle rates of several MHz/cm$^2$ , while exhibiting good spatial resolution ($\leq$ 50 $\mu$m) and modest…

We demonstrate the use of nanodiamond in constructing holographic nanoparticle-polymer composite transmission gratings with large saturated refractive index modulation amplitudes at both optical and slow-neutron wavelengths, resulting in…

In this master thesis, diamond-like carbon DLC/Cr bilayer systems, with thickness up to 1278 nm were formed on ABS, glass and Si substrates. Substrates surface were prepared by oxygen plasma cleaning process. The chromium thin film, which…

Transparent conducting oxides (TCO) are emerging as possible alternative constituent materials to replace noble metals such as silver and gold for low-loss plasmonic and metamaterial (MMs) applications in the near infrared (NIR) regime. The…

In recent decades, photosensitive materials have been used for the development of optical devices not only for light, but also for cold and very cold neutrons. We show that holographically recorded gratings in nanodiamond-polymer composites…

Photonic integrated circuits are indispensible for data transmission within modern datacenters and pervade into multiple application spheres traditionally limited for bulk optics, such as LiDAR and biosensing. Of particular interest are…

Diamond and diamond-like carbon (DLC) coatings are widely employed for their exceptional mechanical, thermal and chemical properties, but their industrial application is often limited by weak adhesion to metallic substrates. In this work,…

Diamond-Like Carbon (DLC) films have been shown to demonstrate various tribological behaviors: in ultra-high vacuum (UHV), with either friction coefficients as low as 0.01 or less and very mild wear, or very high friction coefficients…

We report the construction and commissioning of a new ultracold neutron (UCN) guide-coating facility at the University of Winnipeg. The facility employs pulsed laser deposition (PLD) to produce diamond-like carbon (DLC) coatings on…

A novel type of resistive plate chamber, based on diamond-like carbon (DLC) electrodes is under development for background identification in the MEG II experiment. The DLC-RPC is required to have a radiation hardness to mass irradiation…

A novel Resistive Plate Chamber (RPC) was designed with Diamond-Like Carbon (DLC) electrodes and performance studies were carried out for 384$\,\mathrm{\mu m}$ gap configuration with a $2\,\mathrm{cm}\times2\,\mathrm{cm}$ prototype. The use…

Tunable dielectric meta-surface nanostructures offer incredible performance in optical application due to their extraordinary tunability of the polarization and engineering the dispersion of light with low loss in infrared range. In this…

Since the pioneering work of S.Y. Chou et al.[1] Nano Imprint Lithography (NIL) has emerged as a promising technique for surface patterning, opening for numerous applications ranging from nanophotonics[2] to microfluidics[3]. NIL basically…

In this review, we present our recent computational work on carbon-based nanostructured composites. These materials consist of carbon crystallites embedded in an amorphous carbon matrix and are modeled here through classical and…

Over the past decade, holographic nanodiamond-polymer composite gratings have been developed and optimized as high-efficiency diffractive elements for very cold neutrons (VCN), for use as mirrors and beam splitters in a triple-Laue (LLL)…

In this manuscript, we outline a reliable procedure to manufacture photonic nanostructures from single-crystal diamond (SCD). Photonic nanostructures, in our case SCD nanopillars on thin (< 1$\mu$m) platforms, are highly relevant for…

A systematic review, covering fabrication of nanoscale patterns by laser interference lithography (LIL) and their applications for optical devices are provided. LIL is a patterning method with simple, quick process over a large area without…