相关论文: Grain refinement in unalloyed tantalum structure d…
An innovative way of producing large-scale unalloyed tantalum parts, based on the Wire + Arc Additive Manufacturing process, has been developed in this study. Two different unalloyed tantalum wires have been used to deposit 200-mm-long…
The manufacturing of refractory-metals components presents some limitations induced by the materials characteristic low-temperature brittleness and high susceptibility to oxidation. Powder metallurgy is typically the manufacturing process…
Wire + arc additive manufacture (WAAM) is an attractive method for manufacturing large-scale aerospace components, however the microstructural changes that occur and the effect of interpass rolling are poorly understood. Therefore two…
Metals and alloys fabricated by fusion-based additive manufacturing (AM), or 3D printing, undergo complex dynamics of melting and solidification, presenting challenges to the effective control of grain structure. Herein, we report on the…
Tungsten is considered as one of the most promising materials for nuclear fusion reactor chamber applications. Wire + Arc Additive Manufacturing has already demonstrated the ability to deposit defect-free large-scale tungsten structures,…
Molecular dynamics simulations were used to quantify mechanically-induced structural evolution in nanocrystalline Al with an average grain size of 5 nm. A polycrystalline sample was cyclically strained at different temperatures, while a…
Multiscale periodic metamaterials have been designed for numerous applications, such as impact absorption, acoustic cloaking, photonic band gaps, and mechanical logic gates. This prior work has focused on optimizing mesoscale structure for…
Here we use large-scale molecular dynamics (MD) simulations of the high-rate deformation of nanocrystalline tantalum to investigate the processes associated with plastic deformation for strains up to 100%. We use initial atomic…
In the present investigation, a strongly bonded strip of an aluminium-magnesium based alloy AA5086 is successfully produced through accumulative roll bonding (ARB). A maximum of up to eight passes has been used for the purpose.…
Robotic wire arc additive manufacturing has been widely adopted due to its high deposition rates and large print volume relative to other metal additive manufacturing processes. For complex geometries, printing with variable height within…
Confined thin structures are ubiquitous in nature. Spatial and length constraints have led to a number of novel packing strategies at both the micro-scale, as when DNA packages inside a capsid, and the macro-scale, seen in plant root…
This work presents a pilot study on a strained complex concentrated alloy based on refractory elements: MoNbTaTiZr. Initially, the as-cast and homogenization-annealed conditions were characterized. After casting, the alloy consists of two…
A comprehensive study on thermomechanical processing of pure Mg was conducted through sequential hot extrusion, hot rolling, and cold drawing operations. Three different extrusion ratios (6:1, 25:1, and 39:1) were investigated at…
Ultrafine-grained aluminum alloys offer interesting multifunctional properties with a combination of high strength, low electrical resistivity, and low density. However, due to thermally induced grain coarsening, they typically suffer from…
A large body of literature within the additive manufacturing (AM) community has focused on successfully creating stable tungsten (W) microstructures due to significant interest in its application for extreme environments. However,…
We present an original approach for predicting the static recrystallization texture development during annealing of deformed crystalline materials. The microstructure is considered as a population of subgrains and grains whose sizes and…
A medium Mn steel of composition Fe-4.8Mn-2.8Al-1.5Si-0.51C (wt.\%) was processed to obtain two different microstructures representing two different approaches in the hot rolling mill, resulting in equiaxed vs. a mixed equiaxed and lamellar…
The industrialization of Laser Additive Manufacturing (LAM) is challenged by the undesirable microstructures and high residual stresses originating from the fast and complex solidification process. Non-destructive assessment of the…
There are still debates regarding the mechanisms that lead to hot cracking in parts build by additive manufacturing (AM) of non-weldable Ni-based superalloys. This lack of in-depth understanding of the root causes of hot cracking is an…
Thermomechanical processing such as annealing is one of the main methods to tailor the mechanical properties of materials, however, much is unknown about the reorganization of dislocation structures deep inside macroscopic crystals that…