相关论文: Influence of composition and precipitation evoluti…
We have investigated the coarsening mechanism of intergranular Cr-rich M2B borides after creep and annealing at 850C for approximately 3000 hours in a polycrystalline nickel-based superalloy. Borides were found to be coarser after creep,…
A correlative approach is employed to simultaneously assess structure and chemistry of (carbide and boride) precipitates in a set of novel Co/Ni-base superalloys. Structure is derived from electron backscatter diffraction (EBSD) with…
We investigate the hot cracking susceptibility and creep resistance of three versions of a nickel-based superalloy with different contents of boron, carbon and zirconium fabricated by laser powder bed fusion. Crack-free and creep resistant…
Predicting the mechanical failure of parts in service requires understanding their deformation behavior, and associated dynamic microstructural evolution up to the near-atomic scale. Solutes are known to interact with defects generated by…
Fast directional solidification during Laser Additive Manufacturing (LAM) produces a complex microstructure in nickel-based superalloys, comprising columnar grains with cellular sub-grain structures and carbides. Using non-destructive…
The tensile creep performance of a polycrystalline Co/Ni-base superalloy with a multimodal gamma prime distribution has been examined at 800C and 300MPa. The rupture life of the alloy is comparable to that of RR1000 tested under similar…
Grain boundary tracer diffusion of Ni, Fe and Cr was studied in a Ni-base 602CA coarse-grained alloy. A co-existence of several short-circuit contributions was distinguished at higher temperatures in Harrison's B-type regime (773-873 K),…
This work demonstrates the development of a strong and ductile medium entropy alloy by employing conventional alloying and thermomechanical processing to induce partial recrystallization (PR) and precipitation strengthening in the…
The segregation and ordering behavior of light interstitials (B, C, and N) in Cr30-Ni is examined, as these elements are critical for grain boundary stability and high-temperature mechanical performance in Ni-based superalloys. Using Monte…
Co-base superalloys are considered as promising high temperature materials besides the well-established Ni-base superalloys. However, Ni appears to be an indispensable alloying element also in Co-base superalloys. To address the influence…
Precipitation-strengthened alloys, such as Ni-base, Co-base and Fe-base superalloys, show the development of dendrite-like precipitates in the solid state during aging at near-$\gamma^{\prime}$ solvus temperatures. These features arise out…
The creep behaviour and microstructural evolution of a Sn-3Ag-0.5Cu wt.% sample with a columnar microstructure have been investigated through in-situ creep testing under constant stress of 30 MPa at 298 K. This is important, as 298 K is…
To examine the microstructural evolution that occurs during transient creep, we deformed olivine aggregates to different strains that spanned the initial transient deformation. Two sets of samples with different initial grain sizes of 5…
Hybrid Monte Carlo and molecular dynamics simulations were used to investigate the interaction of light interstitials in multi-element Ni-based alloys. We show that light interstitials such as boron and oxygen fundamentally alter…
Crack initiation and propagation under high-cycle fatigue conditions have been investigated for a polycrystalline Ni-based superalloy by in-situ synchrotron assisted diffraction and phase contrast tomography. The cracks nucleated along the…
The effect of composition on microstructure both at the length scale of the secondary dendrite arm spacing and nano-sized dispersoids during homogenization of Al-Zn-Cu-Mg-Zr alloys has been studied. A comprehensive model that can predict…
Understanding the creep mechanisms and deformation response at different stresses and temperatures is crucial for design using nickel-base superalloys for high-temperature applications. In this study, the creep behaviour of a newly designed…
We report evidence of Re and Mo segregation (up to 2.6 at.% and 1 at.%) along with Cr and Co to the dislocations inside of {\gamma}' precipitates in a second generation Ni-based single crystal superalloy, after creep deformation at…
Creep in single crystal Nickel-based superalloys has been a topic of interest since decades, and nowadays simulations are more and more able to complement experiments. In these alloys, the $\gamma/\gamma'$ phase microstructure co-evolves…
The details of phase separation of a Ni-6.5Al-9.9Mo aged at 978 K for aging times ranging from 0.125 to 1024 h are investigated by atom-probe tomography and lattice-kinetic Monte Carlo (LKMC) simulations. On the basis of the temporal…