相关论文: Influence of composition and precipitation evoluti…
Cobalt-based alloys with {\gamma}/{\gamma}' microstructures have the potential to become the next generation of superalloys, but alloy compositions and processing steps must be optimized to improve coarsening, creep, and rafting behavior.…
Grain boundary wetting as a preliminary stage for zinc induced grain boundary weakening and embrittlement in a Zn coated press hardened 20MnB8 steel was analyzed by means of electron backscatter diffraction, Auger electron spectroscopy,…
There are still debates regarding the mechanisms that lead to hot cracking in parts build by additive manufacturing (AM) of non-weldable Ni-based superalloys. This lack of in-depth understanding of the root causes of hot cracking is an…
Nanostructured electrodes with voids or interconnected pores accommodate large volume changes, shorten ion diffusion pathways, and enhance the structural reversibility of alloying electrodes. While these nanoporous features improve the…
A mesoscale study of a single crystal nickel-base superalloy subjected to an industrially relevant process simulation has revealed the complex interplay between microstructural development and the micromechanical behaviour. As sample gauge…
Microstructure and crystallography of {\delta} phase hydrides in as-received fine grain and 'blocky' alpha large grain Zircaloy-4 (average grain size ~11 {\mu}m and >200 {\mu}m, respectively) were examined using electron backscatter…
Conventional strategies for enhancing creep resistance often rely on grain boundary strengthening, yet this approach can inadvertently promote premature grain boundary fracture. This study presents a subtractive alloy design strategy for…
Creep failure under high temperatures is a complex multiscale and multi-mechanism issue involving inherent microstructural randomness. To investigate the effect of microstructures on the uniaxial/multiaxial creep failure, a dual-scale…
Microstrctural, vibrational, ferroelectric and dielectric properties investigation reveals non-stoichiometric chemical ordered regions (CORs) and relaxor like dielectric characteristics in lead magnesium niobate (PMN) ceramics uniaxially…
The diffusion-controlled growth and microstructural evolution at the interface of aluminide coatings and different substrates such as Ni-base superalloys and steel are reviewed. Quantitative diffusion analysis indicates that the diffusion…
The excellent mechanical properties of the Ni-based superalloy IN718 mainly result from coherent $\gamma''$ precipitates. Due to a strongly anisotropic lattice misfit between the matrix and the precipitate phase, the particles exhibit…
Chromium depletion at grain boundaries (GBs) due to selective attack is a critical issue in the molten salt corrosion of NiCr alloys. Despite the importance of GBs in this process from numerous experimental studies, most theoretical work…
Three novel precipitation strengthened bcc alloys which exhibit a smooth microstructural gradient with composition have been fabricated in bulk form by induction casting. All three alloys are comprised of a mixture of disordered A2-(Fe, Cr)…
The microstructural stability and mechanical properties of superalloys at high temperatures are significantly influenced by the composition and nature of the solutes they contain. Most of the alloys with high solvus temperature have higher…
A systematic study of the compression creep properties of a single-crystalline Co-base superalloy (Co-9Al-7.5W-2Ta) was conducted at 950 {\deg}C, 975 {\deg}C and 1000 {\deg}C to reveal the influence of temperature and the resulting…
Creep of directionally solidified Sn-3Ag-0.5Cu wt.% (SAC305) samples with near-<110> orientation along the loading direction and different microstructural lengthscale is investigated under constant load tensile testing and at a range of…
The decomposition process mechanisms have been investigated in a Fe50Au25Pd25 (at.%) alloy processed by severe plastic deformation. Phases were characterized by X-ray diffraction and microstructures were observed using transmission electron…
X-ray nanodiffraction is applied to study the formation and correlation of domain boundaries in mesocrystalline superlattices of PbS nanocrystals with face-centered cubic structure. Each domain of the superlattice can be described with one…
The initiation of intergranular corrosion at various types of grain boundaries (GBs) was studied at the nanometer scale on microcrystalline copper in 1 mM HCl aqueous solution. In situ Electrochemical Scanning Tunneling Microscopy (ECSTM)…
The temporal evolution of ordered gamma-prime(L12)-precipitates and the compositional trajectories during phase-separation of the gamma(face-centered-cubic(f.c.c.)) and gamma-prime(L12)-phases are studied in a…