相关论文: Helium load on W-O coatings grown by pulsed laser …

This study performed tungsten (W) co-deposition experiments using pulsed laser deposition under exposure to helium/argon plasma in a linear plasma device. Micron-sized spherical W particles formed under co-deposition conditions. It was…

Micron-thick boron films have been deposited by Pulsed Laser Deposition in vacuum on several substrates at room temperature. The use of high energy pulses (>700 mJ) results in the deposition of smooth coatings with low oxygen uptake even at…

Ca- and Zn-subsituted Y1-xCaxBa2(Cu1-yZny)O7-delta (x = 0, 0.05 and y = 0, 0.02, 0.04, 0.05) thin films were grown on SrTiO3 (100) substrates using the pulsed laser deposition (PLD) technique. Effects of various growth parameters on the…

Pulsed Laser Deposition allows to obtain W and W-Ta alloy coatings with different nanostructures, monitored by X-ray diffraction. The correlation between such structures and the elastic properties is investigated for amorphous-like,…

LaTiO$_{3+\delta/2}$, NdTiO$_{3+\delta/2}$, and Nd$_{1-x}$Sr$_{x}$TiO$_{3+\delta/2}$ thin films have been epitaxially grown on (100)SrTiO$_{3}$ and (100)LaAlO$_{3}$ single crystal substrates by using the pulsed laser deposition technique.…

We study the interaction of intense ultrashort laser pulses with cryogenic He jets using 2d/3v relativistic Particle-in-Cell simulations (XOOPIC). Of particular interest are laser intensities $(10^{15}-10^{20})$ W/cm$^2$, pulse lengths $\le…

We deposited Ag_2O films in PLD system on glass substrate for a fixed partial oxygen gas pressure (70 mili Torr) with the variation of laser energy from 75 to 215 mJ/Pulse. The XRD patterns confirm that the films have well crystallinity and…

We show that the quality of Nd1.85Ce0.15CuO4 films grown by pulsed laser deposition can be enhanced by using a non-stoichiometric target with extra copper added to suppress the formation of a parasitic (Nd, Ce)2O3 phase. The properties of…

An atomic and electronic structure of the bulk and thin-film morphologies of ZnO were modified using pulsed Bi-ion implantation (1x1017 cm-2 fluence, 70 min exposure under Bi-ion beam, EBi+ = 30 keV, pulsed ion-current density of not more…

Low resistivity (~3-24 mOhm.cm) with tunable n- and p-type phase pure Cu2O thin films have been grown by pulsed laser deposition at 25-200 0C by varying the background oxygen partial pressure (O2pp). Capacitance data obtained by…

We propose a hybrid laser-driven ion acceleration scheme using a combination target of a solid foil and a density-tailored background plasma. In the first stage, a sub-relativistic proton beam can be generated by the radiation pressure…

Pulsed-laser deposition (PLD) is one of the most promising techniques for the formation of complex-oxide heterostructures, superlattices, and well-controlled interfaces. The first part of this paper presents a review of several useful…

NiO/ZnO heterostructures are grown on c-sapphire substrates using pulsed laser deposition (PLD) technique. X-ray diffraction study shows that the ZnO layer epitaxially grows along [0001]-direction on (0001)sapphire surface as expected.…

Second harmonic (SH) radiation can only be generated in non-centrosymmetric bulk crystals under the electric-dipole approximation. Nonlinear thin films made from bulk crystals are technologically challenging because of complex and high…

Cu2Ta4O12 (CTaO) thin films were successfully deposited on Si(100) substrates by pulsed-laser deposition technique. The crystalline structure and the surface morphology of the CTaO thin films were strongly affected by substrate temperature,…

In this paper, we report the growth of NaxCoO2 thin films by pulsed-laser deposition (PLD). It is shown that the concentration of sodium is very sensitive to the substrate temperature and the target-substrate distance due to the evaporation…

Here we systematically explore the use of pulsed laser deposition technique (PLD) to grow three basic oxides that have rocksalt structure but different chemical stability in the ambient atmosphere: NiO (stable), MnO (metastable) and EuO…

Tungsten is the main candidate material for plasma-facing armour components in future fusion reactors. In-service, fusion neutron irradiation creates lattice defects through collision cascades. Helium, injected from plasma, aggravates…

Absorption losses and laser-induced damage threshold (LIDT) are considered as the major constraint for the development of optical coatings for high-power laser optics. Such coatings require paramount properties like low losses due to…

This research investigates the structural, topological, electrical and optical properties of pulsed laser deposited polycrystalline BiFeO3 thin films on silicon and glass substrate at varying deposition temperatures ranging from 400 degC to…