相关论文: Three-dimensional in situ characterization of phas…
Grain boundaries are dominant imperfections in nanocrystalline materials that form a complex 3-dimensional (3D) network. Solute segregation to grain boundaries is strongly coupled to the grain boundary character, which governs the stability…
Three-dimensional (3D) X-ray diffraction methods were used to analyze the evolution of the load-induced rearrangements of monoclinic twin microstructures within bulk nickel-titanium specimens in 3D and across six orders of magnitude in…
We studied the effect of recrystallization and grain growth on grain boundary self-diffusion in ultrafine grained Ni prepared by high pressure torsion. Two Ni materials of low (99.6 wt. %) and high (99.99 wt. %) purity levels were compared…
Grain boundaries facet due to anisotropic grain boundary energies: While the faceted boundary has a larger area than the corresponding straight boundary, a significantly lower energy of the facets compared to a straight segment can drive…
Solidification is an important process in many alloy processing routes. The solidified microstructure of alloys is usually made up of dendrites, eutectics or a combination of both. The evolving morphologies are largely determined by the…
Recent experimental measurements of Ag impurity diffusion in the {\Sigma}5 (310) grain boundary (GB) in Cu revealed an unusual non-Arrhenius behavior suggestive of a possible structural transformation [Divinski et al., Phys. Rev. B 85,…
Structural transformations at interfaces are of profound fundamental interest as complex examples of phase transitions in low-dimensional systems. Despite decades of extensive research, no compelling evidence exists for structural…
The formation of helium cavities in coarse-grained materials produces hardening proportional to the number density and size of the cavities and due to the interaction of dislocations with intragranular helium defects. In nanostructured…
A phase-field model is developed to simulate intergranular corrosion of ferritic/martensitic steels exposed to liquid lithium. The chromium concentration of the material is used to track the mass transport within the metal and liquid…
The phase behavior of grain boundaries can have a strong influence on interfacial properties. Little is known about the emergence of grain boundary phases in elemental metal systems and how they transform. Here, we observe the nanoscale…
High-energy synchrotron x-rays are used to track grain rotations and the micromechanical evolution of a hexagonal Ti-7Al microstructure as it is cyclically loaded below its macroscopic yield stress. The evolution of the grains through 200…
Several experimental techniques are used for phase identification and microstructure characterization of austempered vermicular cast irons (XRD, SEM, TEM and Mossbauer spectroscopy). Acicular structures were found to be composed by ferrite…
This work integrates in-situ neutron diffraction and crystal plasticity finite element modeling to study the kinematic stability of retained austenite in high carbon bearing steels. The presence of a kinematically metastable retained…
Understanding and controlling the properties and dynamics of topological defects is a lasting challenge in the study of two-dimensional materials, and is crucial to achieve high-quality films required for technological applications. Here…
Deformation microstructure heterogeneities play a pivotal role during dislocation patterning and interface network restructuring. Thus, they affect indirectly how an alloy recrystallizes if at all. Given this relevance, it has become common…
Most metallic and ceramic materials are comprised of a space-filling collection of crystalline grains separated by grain boundaries. While this grain structure has been studied for more than a century, there few rigorous results regarding…
Rapid solidification experiments on thin film aluminum samples reveal the presence of lattice orientation gradients within crystallizing grains. To study this phenomenon, a single-component phase-field crystal (PFC) model that captures the…
A three-dimensional phase-field model is proposed for simulating the magnetic martensitic phase transformation. The model considers a paramagnetic cubic austenite to ferromagnetic tetragonal martensite transition, as it occurs in magnetic…
Improvement of functional and structural fatigue endurance for applications of ferroelastic materials requires an optimization of their composition. A strategy for finding alloy compositions that minimize the transformation hysteresis is…
A multi-phase field model is employed to study the microstructural evolution of an alloy undergoing liquid dealloying. The model proposed extends upon the original approach of Geslin et al. to consider dealloying in the presence of grain…