相关论文: A 3D-printed broadband millimeter wave absorber
We established a production method of a good millimeter-wave absorber by using a 3D-printed mold. The mold has a periodic pyramid shape, and an absorptive material is filled into the mold. This shape reduces the surface reflection. The…
In this paper, a low profile dynamically tunable microwave absorber is proposed, which consists of high impedance surface (HIS) and graphene sandwich structure (GSS). We theoretically demonstrate and experimentally verify that the proposed…
Radio absorptive materials (RAMs) are key elements for receivers in the millimeter-wave range. For astronomical applications, cryogenic receivers are widely used to achieve a high-sensitivity. These cryogenic receivers, in particular the…
Designing broadband metamaterial perfect absorbers is challenging due to the intrinsically narrow bandwidth of surface plasmon resonances. Here, the paper reports an ultra-broadband metamaterial absorber by using space filling Gosper curve.…
We recently developed and characterized an absorber for millimeter wavelengths. To absorb the millimeter wave efficiently, we need to develop the low reflection and high absorption material. To meet these requirements, we tried to add…
The experimental investigation of a broadband far-infrared meta-material absorber is described. The observed absorptance is $>\,0.95$ from ${\rm 1-20\,THz}$ (${\rm 300-15\,\mu m}$) over a temperature range spanning ${\rm 5-300\,K}$. The…
We present results of an extensive suite of numerical simulations that probe square-tiled microwave absorber performance as a function of material properties, frequency, geometry, and unit cell size. The work, which probes both specular…
This paper reports on 3D-printed dielectric image lines for low-loss subTHz applications between 140 and 220 GHz. In contrast to conventional dielectric waveguides, a conductive copper substrate is used to achieve robust routing and…
The loss of surface plasmon polaritons has long been considered as a fatal shortcoming in information transport. Here we propose a plasmonic absorber utilizing this "shortcoming" to absorb the stray light in photonic integrated circuits…
Graphene-based devices have shown great promise for several applications. For graphene devices to be used in real-world systems, it is necessary to demonstrate competitive device performance, repeatability of results, reliability, and a…
This article presents the design of two dual-band graphene-based absorbers for terahertz frequencies. The absorbers are composed of two-dimensional (2D)arrays of ribbons and disks printed on a ground plane backed dielectric spacer. The…
A frequency-diverse computational imaging system synthesized using three-dimensional (3D) printed frequency-diverse metasurface antennas is demonstrated. The 3D fabrication of the antennas is achieved using a combination of PolyLactic Acid…
Due to high dynamic range and ease of use, continuous wave terahertz spectroscopy is an increasingly popular method for optical characterization of components used in cosmic microwave background (CMB) experiments. In this work, we describe…
Three dimensional (3D) fast (< 0.5 hour) printing of micro-optical elements down to sub-wavelength resolution over 100 micrometers footprint areas using femtosecond (fs-)laser oscillator is presented. Using sub-1 nJ pulse energies, optical…
We demonstrate a 3D printed holographic metasurface antenna for beam-focusing applications at 10 GHz within the X-band frequency regime. The metasurface antenna is printed using a dual-material 3D printer leveraging a biodegradable…
Development of novel radiation-absorbent materials and devices for millimetre and submillimetre astronomy instruments is a research area of high interest, and with substantial engineering challenges. Alongside low-profile structure and…
This study proposes a 3D-printed, quad-ridged, dual-pol, flared horn antenna feeder to meet the demands of a modern radio-telescope. The research work presented in this paper involves both the theoretical and the customized / adapted…
An electro-absorption optical modulator concept based upon a dual-graphene layer is presented. The device consists of a silicon-on-insulator waveguide upon which two graphene layers reside, separated by a thin insulating region. The lower…
This article presents a novel approach for designing dual-band absorbers based on graphene and metallic metasurfaces for terahertz and mid-infrared regimes, respectively. The absorbers are composed of a two-dimensional (2D) array of square…
We propose herein a method of material-structure integrated design for broadband absorption of dielectric metamaterial, which is achieved by combination of genetic algorithm and simulation platform. A multi-layered metamaterial absorber…