相关论文: VLSI Implementation of Novel Class of High Speed P…

The oversampling technique has been shown to increase the SNR and is used in many high-performance systems such as in the ADC for audio and DAT systems. This paper presents the design of the decimation and it's VLSI implementation which is…

The recursive comb filters or Cascaded Integrator Comb filter (CIC) are commonly used as decimators for the sigma-delta modulators. This paper presents the VLSI implementation, analysis and design of high-speed CIC filters which are based…

The Cascaded Integrator Comb filters (CIC) find many applications in recent electronic devices such as frequency selection functions in a digital radio or modem and any filter structure that is required to efficiently process large sample…

This paper presents the design of CIC filters based on a low-pass filter for reducing the sampling rate, also known as decimation process. The targeted application for the filter is in the analog to digital conversion (ADC).The CIC is…

Digital Decimation process plays an important task in a communication system. It mostly is applied in transceiver when the frequency reduction is required. However, the decimation process for sigma-delta modulator is considered in this…

This paper conducts a comprehensive system-level analysis of mm-Wave full-duplex transceivers, focusing on a receiver employing a four-stage self-interference cancellation (SIC) process. The analysis aims to optimize the noise and linearity…

We have designed three ASICs for possible applications in the optical links of a new layer of pixel detector in the ATLAS experiment for the first phase of the LHC luminosity upgrade. The ASICs include a high-speed driver for the VCSEL, a…

We propose a novel coded integrated passive sensing and communication (CIPSAC) system with orthogonal frequency division multiplexing (OFDM), where a multi-antenna base station (BS) passively senses the parameters of the targets and decodes…

We propose deep learning based coded waveform design for integrated sensing and communication (ISAC) with orthogonal frequency-division multiplexing (OFDM). Our goal is to design a coded waveform capable of delivering accurate target…

In this paper, we introduce a couple of hardware implementations of compact VLC transmitter and receiver for the first time. Compared with related works, our VLC transmitter is non-RLL one, that means flicker mitigation can be guaranteed…

Integrated sensing and communication (ISAC) is a promising paradigm for future wireless systems due to spectrum reuse, hardware sharing, and joint waveform design. In dynamic scenes, Doppler shifts degrade both sensing and communication,…

We propose without loss of generality strategies to achieve a high-throughput FPGA-based architecture for a QC-LDPC code based on a circulant-1 identity matrix construction. We present a novel representation of the parity-check matrix (PCM)…

This work presents an efficient ASIC implementation of successive cancellation (SC) decoder for polar codes. SC is a low-complexity depth-first search decoding algorithm, favorable for beyond-5G applications that require extremely high…

Fifth-generation (5G) cellular systems will build on massive multi-user (MU) multiple-input multiple-output (MIMO) technology to attain high spectral efficiency. However, having hundreds of antennas and radio-frequency (RF) chains at the…

A sample rate converter(SRC) is designed to adjust the sampling rate of digital signals flexibly for different application requirements in the broadband signal processing system. In this paper, a novel parallel-serial structure is proposed…

We show that to lower the sampling rate in a spread spectrum communication system using Direct Sequence Spread Spectrum (DSSS), compressive signal processing can be applied to demodulate the received signal. This may lead to a decrease in…

This work presents the design and preliminary performance of a highly-multiplexed superconducting detector readout. The readout system is implemented on the Xilinx ZCU111 RFSoC Evaluation Board. The current design uses 12% of the DSPs, 60%…

As a promising key technology of 6th generation (6G) mobile communication system, integrated sensing and communication (ISAC) technology aims to make full use of spectrum resources to enable the functional integration of communication and…

Polar codes are a recently proposed class of block codes that provably achieve the capacity of various communication channels. They received a lot of attention as they can do so with low-complexity encoding and decoding algorithms, and they…

We present the design, fabrication, and measurement of a high-temperature superconductor (HTSC) Stepped Impedance Resonator (SIR) band-pass filter for S-band applications, and its incorporation into a cryogenic receiver cascade. The 11-pole…