相关论文: Determination of the BCS material parameters of th…
There is a need to better understand the intrinsic limit of radiofrequency (RF) surface impedance that determines the performance of superconducting RF cavities in particle accelerators. Here we present a field-dependent derivation of…
We present measurements and simulations of superconducting Nb co-planar waveguide resonators on sapphire substrate down to millikelvin temperature range with different readout powers. In the high temperature regime, we demonstrate that the…
Superconducting coplanar waveguide (SCPW) resonators with high internal quality factors (\Q_i) are essential for quantum information applications, but suffer severe Qi degradation under magnetic fields due to quasiparticle generation and…
A new linac using superconducting quarter-wave resonators (QWR) is under construction at CERN in the framework of the HIE-ISOLDE project. The QWRs are made of niobium sputtered on a bulk copper substrate. The working frequency at 4.5 K is…
The high critical magnetic field and relatively high critical temperature of niobium nitride (NbN) make it a promising material candidate for applications in superconducting quantum technology. However, NbN-based devices and circuits are…
Based on BCS theory with moving Cooper pairs, the electron states distribution at 0K and the probability of electron occupation with finite temperature have been derived and applied to anomalous skin effect theory to obtain the surface…
In this paper, we apply the two-band extension [1] of BCS theory [2] into the Mattis-Bardeen theory [3] to obtain the surface impedance of a two-band superconductor, and apply it to magnesium diboride (MgB2) for radiofrequency (RF)…
The surface impedance of Nb/CuMn (superconducting/spin-glass) bilayers has been measured at 10 GHz with the parallel plate resonator technique to obtain information about the exotic behavior of the order parameter in…
Superconducting boron doped silicon is a promising material for integrated silicon quantum devices. In particular, its low electronic density and moderate disorder make it a suitable candidate for the fabrication of large inductances with…
We investigate the microwave electrodynamic properties of a single superconducting thin film split-ring resonator (SRR). The experiments were performed in an all-Nb waveguide, with Nb wires and Nb SRRs. Transmission data showed a high-Q…
We present spiral resonators of thin film niobium (Nb) that exhibit large geometric inductance, high critical magnetic fields and high single photon quality factors. These low loss geometric inductors can be a compelling alternative to…
An increase in the quality factor of superconducting radiofrequency cavities is achieved by minimizing the surface resistance during processing steps. The surface resistance is the sum of temperature independent residual resistance and…
New superconducting materials, particularly iron-based superconductors (IBS), have recently attracted attention for their potential applications in particle detectors and accelerators. This paper discusses the application of these materials…
Niobium nitride (NbN) is a particularly promising material for quantum technology applications, as entails the degree of reproducibility necessary for large-scale of superconducting circuits. We demonstrate that resonators based on NbN thin…
We describe high-Tc superconductivity in layered materials within a BCS theory as a BEC of massless-like Cooper pairons satisfying a linear dispersion relation, and propagating within quasi-2D layers of finite width defined by the charge…
Superconducting resonators with high-kinetic inductance play a central role in hybrid quantum circuits, enabling strong coupling with quantum systems with small electric dipole moment and improved parametric amplification. However,…
Axions, hypothetical particles theorized to solve the strong CP-problem, are presently being considered as strong candidates as cold dark matter constituents. The signal power of resonant-based axion detectors, known as haloscopes, is…
The superconducting materials that make up an MKID have a significant effect on its performance. The $T_\textrm{c}$ and normal state resistivity $\rho_\textrm{N}$ of the film determine the penetration depth $\lambda$ and therefore how much…
We present an experimental approach for cryogenic dielectric measurements on ultra-thin insulating films. Based on a coplanar microwave waveguide design we implement superconducting quarter-wave resonators with inductive coupling, which…
The field distribution inside the superconducting radiofrequency (SRF) film with different mean free path is studied using niobium (Nb) as an example. The surface resistance of clean Nb film with different substrate and different film…