相关论文: On the optimization of the magneto-plasma compress…
In this paper, the power response of power electronic loads in case of voltage drops are measured and their dynamics are analysed. Based on this, dynamic simulation models are derived which can be used for voltage stability investigations.…
Supercapacitors are increasingly used as energy storage elements. Unlike batteries, their state of charge has a considerable influence on their voltage in normal operation, allowing them to work from zero to their maximum voltage. In this…
A low power magnetization switching scheme based on the voltage control of magnetic anisotropy (VCMA) is proposed. In contrast to the conventional switching scheme using VCMA, where the magnetic anisotropy is eliminated during the voltage…
The decay of the electrical energy in a resistor-vacuum capacitor circuit is shown to involve multiple relaxation processes, with dramatically different time constants. This is measured using a vacuum capacitor to eliminate the effect of a…
Transient stability is crucial to the reliable operation of power systems. Existing theories rely on the simplified electromechanical models, substituting the detailed electromagnetic dynamics of inductor and capacitor with their impedance…
In this study the power flow in a coupled mechanical and electromagnetic harvesting system in presence of both positional and electrical fluctuations is analyzed. Explicit expressions for the power into and out of the mechanical and…
Atmospheric pressure plasma jets (APPJs) are versatile devices with numerous applications. This work focuses on APPJs generated at the tip of long, flexible tubes using the jet transfer technique. The plasma source consists of a primary…
This paper conducted a comprehensive study on the performance of a rotary compressor over a rotational speed range of 80Hz to 200Hz through experimental tests and mathematical modeling. A compressor performance test rig was designed to…
Reduction in power consumption has become a major criterion of design in modern ICs. One such scheme to reduce power consumption by an IC is the use of multiple power supplies for critical and non-critical paths. To maintain the impedance…
The energy consumption of DRAM is a critical concern in modern computing systems. Improvements in manufacturing process technology have allowed DRAM vendors to lower the DRAM supply voltage conservatively, which reduces some of the DRAM…
Phasor measurement units (PMUs) provide a high-resolution view of the power system at the locations where they are placed. As such, it is desirable to place them in bulk in low voltage distribution circuits. However, the power consumption…
As ASIC supply voltages approach one volt, the source-impedance goals for power distribution networks are driven ever lower as well. One approach to achieving these goals is to add decoupling capacitors of various values until the desired…
Modern power systems are characterized by low inertia and fast voltage dynamics due to the increase of sources connecting via power electronics and the removal of large traditional thermal generators. Power electronics are commonly equipped…
A set of power supplies (PS) with output power rated from 100 W up to 10 kW for electromagnets powering was developed. These PS have range of current tuning of 60-80 db with high accuracy (error should be less than 0,01%). Some types of…
Achieving the highest possible mass resolving power in a multi-reflection time-of-flight mass spectrometer requires very high-stability power supplies. To this end, we have developed a programmable high-voltage power supply that can achieve…
Capacitors are ubiquitous in electronic and electrical devices. In this article, we study -- both theoretically and experimentally -- the charging and discharging of capacitors using active control of a voltage source. The energy of these…
In magnetized capacitively coupled radio-frequency discharges operated at low pressure the influence of the magnetic flux density on discharge properties has been studied recently both by experimental investigations and in simulations. It…
Particle-in-cell/Monte Carlo technique is used to simulate low pressure electro-negative and electro-positive plasmas at a frequency of 10 MHz. The potential, electric field, electron and ion density, and currents flowing across the plasma…
We study a type of port-Hamiltonian system, in which the controller or disturbance is not applied to the flow variables, but to the systems power, a scenario that appears in many practical applications. A suitable framework is provided to…
In many cases, the behavior of physical memristive devices can be relatively well captured by using a single internal state variable. This study investigates the low-power control of first-order memristive devices to derive the most…