相关论文: Strain gradient plasticity-based modeling of hydro…
We present a new theoretical and numerical framework for modelling mechanically-assisted corrosion in elastic-plastic solids. Both pitting and stress corrosion cracking (SCC) can be captured, as well as the pit-to-crack transition.…
In this paper the problem of a plane strain hydraulic fracture propagating in an elasto-plastic material is analyzed. A new stress redistribution model for the proximity of the fracture tip is formulated and a resulting plasticity-dependent…
A mathematical model for crack-tip fields is proposed in this paper for the response of a three-dimensional (3-D) porous elastic solid whose material moduli are dependent on the density. Such a description wherein the generalized Lam\`e…
A finite element framework is presented for the analysis of crack-tip phenomena in an elastic material containing a single edge crack under compressive loading. The mechanical response of the material is modeled by a nonlinear constitutive…
A variety of severe plastic deformation (SPD) techniques have been developed to process materials to high strains and impart microstructural refinement. High pressure torsion (HPT) is one technique that imparts inhomogeneous strain to…
We present a probabilistic framework for brittle fracture that builds upon Weibull statistics and strain gradient plasticity. The constitutive response is given by the mechanism-based strain gradient plasticity theory, aiming to accurately…
A micromechanical model at the microscale within a crystal plasticity self-consistent model, is used to analyse loading histories in Type 316H stainless steel, common to structural components in high-temperature power plants. The study…
Crack growth in stress corrosion cracking (SCC) in 7xxx Al alloys is an intermittent process, which generates successive crack arrest markings (CAMs) visible on the fracture surface. It is conjectured that H is generated at the crack tip…
A study has been performed using a crystal plasticity based finite element method to understand the effect of various stress states and crystal orientations with respect to loading direction for FCC single crystals in both hydrogenated and…
The onset of sub-critical crack growth during slow strain rate tensile testing (SSRT) is assessed through a combined experimental and modeling approach. A systematic comparison of the extent of intergranular fracture and expected hydrogen…
The damage mechanisms and load redistribution of high strength TC17 titanium alloy/unidirectional SiC fibre composite (fibre diameter = 100 $\mu$m) under high temperature (350 {\deg}C) fatigue cycling have been investigated in situ using…
A crystal plasticity theory was developed for use in simulations of dynamic loading at high pressures and strain rates. At pressures of the order of the bulk modulus, compressions o(100%) may be induced. At strain rates o(10^9)/s or higher,…
To deploy the airframe digital twin or to conduct probabilistic evaluations of the remaining life of a structural component, a (near) real-time crack-growth simulation method is critical. In this paper, a reduced-order simulation approach…
Previous studies demonstrate that grain-boundary sliding could accelerate creep rate and give rise to large internal stresses that can lead to damage development, e.g. formation of wedge cracks. The present study provides more insight into…
Due to their superior fatigue strength, martensitic steels are the material of choice for high cyclic loading applications such as coil springs. However, crack propagation is influenced by residual stresses and their interaction is poorly…
Slow strain rates tests (SSRT) were conducted on hydrogen-containing specimens of PH13-8Mo maraging stainless steel. Hydrogen-assisted subcritical quasi-cleavage cracking was shown to take place during SSRT, thus accelerating material…
Crystal plasticity models connect macroscopic deformation with the physics of microscale slip in polycrystalline materials. These models can be calibrated using global stress-strain curves, but the resulting parametrization is often not…
Using an elastostatic description of crack growth based on the Griffith criterion and the principle of local symmetry, we present a stochastic model describing the propagation of a crack tip in a 2D heterogeneous brittle material. The model…
This paper presents a finite element model for the analysis of crack-tip fields in a transversely isotropic strain-limiting elastic body. A nonlinear constitutive relationship between stress and linearized strain characterizes the material…
We present a new theoretical and numerical phase field-based formulation for predicting hydrogen-assisted fatigue. The coupled deformation-diffusion-damage model presented enables predicting fatigue crack nucleation and growth for arbitrary…