相关论文: Deformation mechanism map of Cu/Nb nanoscale metal…
Nanoscale metallic multilayer (NMM) films are systems offering insight into the role of interfaces in metal plasticity, deformation, and strengthening mechanisms. Magnetron sputtering was used to fabricate the Ta-Cu NMM films with a…
The mechanical properties of Cu/Nb metallic nanolaminates with different layer thickness (7, 16, 34 and 63 nm) were studied by means of micropillar compression tests from room temperature to 400 C. Both strain-rate jump and constant strain…
The mechanisms of deformation and failure of Cu/Nb nanolaminates manufactured by accumulated roll bonding were analysed using in-situ TEM mechanical tests. Dog-bone small-scale tensile specimens were prepared using a FIB-based technique…
Characterizing plasticity mechanisms below the ductile-to-brittle transition temperature is traditionally difficult to accomplish in asystematic fashion. Here, we use a new experimental setup to perform in situ cryogenic mechanical testing…
Understanding nanomechanical response of materials represents a scientific challenge. Here, we have used in-situ electron microscopy to reveal drastic for the first time changes of structural behavior during deformation of 1-nm-wide metal…
Nickel carbon nanotube composites with varying amounts of carbon nanotubes are deformed by high pressure torsion at different deformation temperatures to high strains, where no further refinement of the Nickel matrix microstructure is…
Unlike the tensile mode, compressive deformation of a bcc metallic nanostructure is mediated by the glide of screw dislocation. Although the bcc screw dislocations are well known to possess unusual attributes, it is still unclear how these…
The mechanical behaviour and deformation mechanisms of magnetron-sputtered Zr/Nb nanoscale multilayers were analysed as a function of the periodicity (L = 10 and 75 nm) and annealing time at 350C (2-336 hrs). The strength of the…
The mechanical behavior of nanotwinned Cu was studied through indentation creep and constant strain rate indentation tests from 25 $^\circ$C to 200 $^\circ$C. The results showed an enhanced strain rate sensitivity of nanotwinned Cu with…
Much scientific and practical interest is currently focused on the atomic-scale mechanical behaviors of metallic nanocrystals with different crystal structures at room temperature, while the high-temperature plastic deformation in tungsten…
We carried out matched experiments and molecular dynamics simulations of the compression of nanopillars prepared from Cu$\vert$Au nanolaminates with 25 nm layer thickness. The stress-strain behavior obtained from both techniques are in…
Nanocrystalline metals, i.e. metals with grain sizes from 5 to 50 nm, display technologically interesting properties, such as dramatically increased hardness, increasing with decreasing grain size. Due to the small grain size, direct…
The deformation behavior of single crystal and nanocrystalline nickel were studied using in situ micropillar compression experiments from quasi-static to high strain rates up to 10^3 s-1. Deformation occurred by dislocation slip activity in…
Niobium is commonly used for superconducting quantum systems as readout resonators, capacitors, and interconnects. The coherence time of the superconducting qubits is mainly limited by microwave dissipation attributed to two-level system…
Ni-based superalloy Inconel-718 is ubiquitous in metal 3D printing where high cooling rate and thermal gradient are present. These manufacturing conditions are conducive to high initial dislocation density and porosity or void in the…
Ni/Al reactive multilayers are promising materials for applications requiring controlled local energy release and superior mechanical performance. This study systematically investigates the impact of compositional variations, ranging from…
Understanding the mechanical properties of metals at extreme conditions is essential for the advancement of miniaturized technologies. As dimensions decrease, materials will experience higher strain rates at the same applied velocities.…
Bulk nanocrystalline materials of small and medium ferromagnetic content were produced using severe plastic deformation by high-pressure torsion at roomtemperature. Giant magnetoresistive behavior was found for as deformed materials, which…
Room-temperature transport properties (the zero-field resistivity, \rho 0, and the GMR) were studied for ED Ni50Co50/Cu multilayers as a function of the individual layer thicknesses and total multilayer thickness. The Cu deposition…
The influence of pre-strain and temperature on the superior properties exhibited by an Nb nanowire embedded in a NiTi shape memory alloy (SMA) are investigated via molecular dynamics simulations. To this end, a new Nb-Ni-Ti ternary…