相关论文: Autoignition of Methyl Valerate at Low to Intermed…
New experimental data are collected for methyl-cyclohexane (MCH) autoignition in a heated rapid compression machine (RCM). Three mixtures of MCH/O2/N2/Ar at equivalence ratios of $\phi$=0.5, 1.0, and 1.5 are studied and the ignition delays…
The autoignition delays of mixtures of methyl-cyclohexane (MCH), oxygen, nitrogen, and argon have been studied in a heated rapid compression machine under the conditions $P_C$ = 50 bar, $T_C$ = 690 - 910K. Three different mixture…
Autoignition experiments for n-butanol have been performed using a heated rapid compression machine at compressed pressures of 15 and 30 bar, in the compressed temperature range of 675-925 K, and for equivalence ratios of 0.5, 1.0, and 2.0.…
Investigation of the autoignition delay of the butanol isomers has been performed at elevated pressure of 15 bar and low to intermediate temperatures of 725-870 K. Stoichiometric mixtures made in nitrogen/oxygen air were studied. For the…
Autoignition delay experiments were performed for n-butanol in a heated rapid compression machine. Experiments were performed at pressures of 15 and 30 bar, in the temperature range 650-900 K, and for equivalence ratios of 0.5, 1.0, and…
Autoignition delay experiments for the isomers of butanol, including n-, sec-, tert-, and iso-butanol, have been performed using a heated rapid compression machine. For a compressed pressure of 15 bar, the compressed temperatures have been…
Autoignition delay times, ?, of methyl crotonate, methyl acrylate, ethyl butanoate, ethyl crotonate, and ethyl acrylate were studied in shock tube experiments. A series of mixtures diluted with argon, of varying fuel/oxygen equivalence…
The autoignition delays of iso-butanol, oxygen, and nitrogen mixtures have been measured in a heated rapid compression machine (RCM). At compressed pressures of 15 and 30 bar, over the temperature range 800-950 K, and for equivalence ratio…
Autoignition delay times have been measured in a rapid compression machine at Lille at temperatures after compression from 630 to 840 K, pressures from 8 to 14 bar, \Phi = 1 and for a iso octane/1 hexene mixture containing 82% iso-octane…
Investigation of the autoignition delay of the butanol isomers has been performed at elevated pressures of 15 bar and 30 bar and low to intermediate temperatures of 680-860 K. The reactivity of the stoichiometric isomers of butanol, in…
Autoignition experiments of stoichiometric mixtures of s-, t-, and i-butanol in air have been performed using a heated rapid compression machine (RCM). At compressed pressures of 15 and 30 bar and for compressed temperatures in the range of…
Ignition delay times of cyclopentene-oxygen-argon mixtures were measured behind reflected shock waves. Mixtures contained 0.5 or 1 % of hydrocarbons for equivalence ratios ranging from 0.5 to 1.5. Reflected shock waves conditions were:…
Methane pyrolysis provides a scalable alternative to conventional hydrogen production methods, avoiding greenhouse gas emissions. However, high operating temperatures limit economic feasibility on an industrial scale. A major scientific…
Ignition of Jet-A/air mixtures was studied behind reflected shock waves. Heating of shock tube at temperature of 150 C was used to prepare a homogeneous fuel mixture. Ignition delay times were measured from OH emission at 309 nm and from…
Reactivity Controlled Compression Ignition (RCCI) is a new advanced engine concept that uses a dual fuel mode of operation to achieve significant improvements in fuel economy and emissions output. The fuels that are typically used in this…
Ignition delay times of cyclohexane-oxygen-argon and cyclopentane-oxygen-argon mixtures have been measured in a shock tube, the onset of ignition being detected by OH radical emission. Mixtures contained 0.5 or 1 % of hydrocarbon for…
In the context of the search for gasoline surrogates for kinetic modeling purpose, this paper describes a new model for the low-temperature auto-ignition of n-heptane/iso-octane/hexene/toluene blends for the different linear isomers of…
The prediction of auto-ignition delay times in HCCI engines has risen interest on detailed chemical models. This paper described a validated kinetic mechanism for the oxidation of a model Diesel fuel (n-decane and α-methylnaphthalene).…
An interface-resolved simulation of the combustion of a fuel droplet suspended in normal gravity is presented in this work, followed by an extensive analysis on the physical aspects involved. The modeling is based on DropletSMOKE++, a…
Combustion process can become more energy efficient and environment friendly if used with appropriate fuel additive. Discovery of fuel additive can be accelerated by applying hybrid approach of using of chemical kinetics and Machine…