相关论文: FPGA Based Implementation of Distributed Minority …

The distributed minority and majority voting based redundancy (DMMR) scheme was recently proposed as an efficient alternative to the conventional N-modular redundancy (NMR) scheme for the physical design of mission/safety-critical circuits…

A new majority and minority voted redundancy (MMR) scheme is proposed that can provide the same degree of fault tolerance as N-modular redundancy (NMR) but with fewer function units and a less sophisticated voting logic. Example NMR and MMR…

N-modular redundancy (NMR) is commonly used to enhance the fault tolerance of a circuit/system, when subject to a fault-inducing environment such as in space or military systems, where upsets due to radiation phenomena, temperature and/or…

For digital system designs, triple modular redundancy (TMR), which is a 3-tuple version of N-modular redundancy is widely preferred for many mission-control and safety-critical applications. The TMR scheme involves two-times duplication of…

Triple Modular Redundancy (TMR) is a suitable fault tolerant technique for SRAM-based FPGA. However, one of the main challenges in achieving 100% robustness in designs protected by TMR running on programmable platforms is to prevent upsets…

Mission-critical and safety-critical applications generally tend to incorporate triple modular redundancy (TMR) to embed fault tolerance in their physical implementations. In a TMR realization, an original function block, which may be a…

As more the communications and signal process we use in the today life the more we intend to develop more reliable devices which gives fewer errors due to transient fault, So we use a technique called 5-modular redundancy to generate fewer…

Triple Modular Redundancy (TMR) is one of the most common techniques in fault-tolerant systems, in which the output is determined by a majority voter. However, the design diversity of replicated modules and/or soft errors that are more…

Triple Modular Redundancy (TMR) has been traditionally used to ensure complete tolerance to a single fault or a faulty processing unit, where the processing unit may be a circuit or a system. However, TMR incurs more than 200% overhead in…

This paper proposes a new method to monitor and mitigate fault induced delayed voltage recovery (FIDVR) phenomenon in distribution systems using {\mu}PMU measurements in conjunction with a Reduced Distribution System Model (RDSM). The…

Hazard radiation can lead the system fault therefore Fault Tolerance is required. Fault Tolerant is a system, which is designed to keep operations running, despite the degradation in the specific module is happening. Many fault tolerances…

Almost all dependable systems use some form of redundancy in order to increase fault-tolerance. Very popular are the $N$-Modular Redundant (NMR) systems in which a majority voter chooses the voting output. However, elaborate systems require…

For critical applications that require a higher level of reliability, the Triple Modular Redundancy (TMR) scheme is usually employed to implement fault-tolerant arithmetic units. However, this method imposes a significant area and…

In this study, we introduced a probabilistic voter, regarding symbol probabilities in decision process besides majority consensus. Conventional majority voter is independent of functionality of redundant modules. In our study, proposed…

Despite its maturity, the field of fault-tolerant redundancy suffers from significant terminological fragmentation, where functionally equivalent methods are frequently described under disparate names across academic and industrial domains.…

Montgomery modular multiplication is widely-used in public key cryptosystems (PKC) and affects the efficiency of upper systems directly. However, modulus is getting larger due to the increasing demand of security, which results in a heavy…

Intermittent computing systems operate by relying only on harvested energy accumulated in their tiny energy reservoirs, typically capacitors. An intermittent device dies due to a power failure when there is no energy in its capacitor and…

This paper explores advances in reconfiguration properties of SRAM-based FPGAs, namely Partial Dynamic Reconfiguration, to improve the resilience of critical systems that take advantage of this technology. Commercial of-the-shelf…

Autonomous mobile robots (AMRs), used for search-and-rescue and remote exploration, require fast and robust planning and control schemes. Sampling-based approaches for Model Predictive Control, especially approaches based on the Model…

SRAM-based FPGAs are popular in the aerospace industry for their field programmability and low cost. However, they suffer from cosmic radiation-induced Single Event Upsets (SEUs). Triple Modular Redundancy (TMR) is a well-known technique to…