相关论文: Spin Coated Multilayered Cupric Oxide Thin Films a…

This study systematically investigates the microstructural evolution of nanoparticle-based CuO, WO$_3$, and composite 'CuO-WO$_3$' thin films induced by their post-deposition annealing. The films were reactively deposited using a…

The copper ferrite thin films have been deposited by RF sputtering at a 50W rf power. The As-deposited films are annealed in air at $800^{\circ}$C and then slow cooled. The As-deposited (AD) as well as slow cooled (SC) films are studied…

We fabricated superconducting MgB2 thin films on (001) MgO substrates. The samples were prepared by magnetron rf and dc co-sputtering on heated substrates. They were annealed ex-situ for one hour at temperatures between 450{\deg}C and…

A comparative study of the physical properties of undoped Zinc Oxide (ZnO) and Al doped Zinc Oxide (AZO) thin films were performed as a function of annealing temperature. The structural properties were analyzed using X-ray diffraction and…

Crystallization of thin film materials by exploiting laser induced crystallization has been advancing for the past four decades. This unique thin film technique has been predominantly used in processing thin film materials made of a single…

The Fe-doped CuO thin films were deposited onto glass substrates by Spray pyrolysis technique. The structural, micro-structural, optical and electrical properties of the synthesized samples were investigated in details. The X-Ray…

In this paper Al doped ZnO (AZO) thin films with 0, 3, 6 and 12 at. % Al concentration were prepared by sol-gel method on glass substrates. The deposited films were annealed at different temperatures of 300, 350, 400, 450 and 500 {\deg}C…

Thin films of the charge-ordered (CO) compound Pr$_{0.5}$Ca$_{0.5}$MnO$_{3}$ have been deposited onto (100)-oriented SrTiO$_{3}$ substrates using the Pulsed Laser Deposition technique. Magnetization and transport properties are measured…

Thin films of cadmium stannate was prepared using low cost cadmium acetate and tin (II) chloride precursors by spray pyrolysis technique at three different substrate temperatures of 400, 450 and 5000 C. A novel procedure of simultaneously…

Varying the substrate temperature changes structural and magnetic properties of spinel ferrite NZFO thin films. XRD of films grown at different temperature display only 004 reflections, without any secondary peaks, showing growth…

We have synthesized the novel material Na_2IrO_3 and studied its structure, transport, magnetic, and thermal properties using powder x-ray diffraction (PXRD), electrical resistivity, isothermal magnetization M versus magnetic field H,…

Objective of this work was to synthesize Copper doped Zinc Oxide (CZO) films and optimization of process parameters by varying molarity of zinc acetate dehydrate from 0.5 M to 1.0 M, concentration of copper acetate monohydrate from 1% to 5…

Thin aluminum oxide films were deposited by a new and simple physicochemical method called chemical liquid phase deposition (CLD) on semiconductor materials. Aluminum sulfate with crystallized water and sodium bicarbonate were used as…

In the search for alternative plasmonic materials SrMoO3 has recently been identified as possessing a number of desirable optical properties. Owing to the requirement for many plasmonic devices to operate at elevated temperatures however,…

Optical properties of single-crystal monoclinic CuO in the range 70 - 6000 \cm were studied at temperatures from 7 to 300 K. Normal reflection spectra were obtained from the (001) and (010) crystal faces thus giving for the first time…

NiO is a promising p-type material for photovoltaics and power electronics, but its temperature limits remain unclear. Using in situ high-temperature X-ray diffraction (HT-XRD) from 30 to 1100 C, we track the structural evolution of NiO…

Copper ferrite thin films were deposited on amorphous quartz substrates. The as deposited films were annealed in air and either quenched or slow cooled. Magnetization studies were carried out on the as deposited as well as annealed films…

The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by…

Pb(Zr0.52Ti0.48)O3 (PZT) thin films were in situ deposited by pulsed laser deposition (PLD) on Pt/Ti/SiO2/Si substrates using a template layer derived by sol-gel method. A 0.1-$\mu$m-thick PZT layer with (111) or (100)-preferred orientation…

Orientation, structure and morphology in the early growth stages of CuO films on strontium titanate were studied by synchrotron radiation X-ray diffraction. Nanostructured CuO films were obtained by ex situ heat treatment at 970 K in oxygen…