相关论文: A New Method for Compensation and Rematch of Cavit…

The Fermilab Linac experiences longitudinal beam phase drift, leading to increased particle loss, conventionally corrected through labor-intensive manual RF adjustments. This project explores machine learning-based automation for drift…

A fully digital beam position and phase measurement (BPPM) system was designed for the linear accelerator (LINAC) in Accelerator Driven Sub-critical System (ADS) in China. Phase information is obtained from the summed signals from four…

Significant transient beam loading effects were observed during beam commissioning tests of prototype II of the injector for the Accelerator Driven Sub-critical (ADS) system, which took place at the Institute of Modern Physics, Chinese…

A new field programmable gate array (FPGA)-based emulation platform is proposed to accelerate fault tolerance analysis of inference accelerators of convolutional neural networks (CNN). For a given CNN model, hardware accelerator…

Genetic Algorithms (GAs) are used to solve search and optimization problems in which an optimal solution can be found using an iterative process with probabilistic and non-deterministic transitions. However, depending on the problem's…

An efficient hardware implementation for Simultaneous Localization and Mapping (SLAM) methods is of necessity for mobile autonomous robots with limited computational resources. In this paper, we propose a resource-efficient FPGA…

Field-programmable gate array (FPGA) based accelerators are being widely used for acceleration of convolutional neural networks (CNNs) due to their potential in improving the performance and reconfigurability for specific application…

Anomalies in radio-frequency (RF) stations can result in unplanned downtime and performance degradation in linear accelerators such as SLAC's Linac Coherent Light Source (LCLS). Detecting these anomalies is challenging due to the complexity…

Hardware failures are a growing challenge for machine learning accelerators, many of which are based on systolic arrays. When a permanent hardware failure occurs in a systolic array, existing solutions include localizing and isolating the…

Multigap cavities are used extensively in linear accelerators to achieve velocities up to a few percent of the speed of light, driving nuclear physics research around the world. Unlike for single-gap structures, there is no closed-form…

Improving the efficiency of edge detection in embedded applications, such as UAV control, is critical for reducing system cost and power dissipation. Field programmable gate arrays (FPGA) are a good platform for making improvements because…

The ever-increasing demand for computational power and I/O throughput in space applications is transforming the landscape of on-board computing. A variety of Commercial-Off-The-Shelf (COTS) accelerators emerges as an attractive solution for…

Accelerators produce too many signals for a small operations team to monitor in real time. In addition, many of these signals are only interpretable by subject matter experts with years of experience. As a result, changes in accelerator…

Background: Clinical linear accelerators are an accessible platform for preclinical research on the biological effects of ultra rapid electron irradiation (FLASH). However, they are not inherently designed for the accurate pulse control…

Here, we introduce Linac_Gen, a tool developed at Fermilab, which combines machine learning algorithms with Particle-in-Cell methods to advance beam dynamics in linacs. Linac_Gen employs techniques such as Random Forest, Genetic Algorithms,…

Field Programmable Gate Arrays (FPGAs) are more prone to be affected by transient faults in presence of radiation and other environmental hazards compared to Application Specific Integrated Circuits (ASICs). Hence, error mitigation and…

Many present and future accelerators must operate with high intensity beams when distortions induced by space charge forces are among major limiting factors. Betatron tune depression of above approximately 0.1 per cell leads to significant…

The low energy part of the FAST linear accelerator based on 1.3 GHz superconducting RF cavities was successfully commissioned. During commissioning, beam based model dependent methods were used to correct linear lattice and trajectory.…

With today's increasing demand for digital devices in Substation Automation Systems (SAS) based on the IEC61850 standard, the measured data error due to the synchronization problem should be considered as a significant problem in…

The demand for more developed and agile urban taxi drones is increasing rapidly nowadays to sustain crowded cities and their traffic issues. The critical factor for spreading such technology could be related to the safety criteria that must…