相关论文: Design, prototyping and testing of a compact super…

Crab crossing is essential for high-luminosity colliders. The High Luminosity Large Hadron Collider (HL-LHC) will equip one of its Interaction Points (IP1) with Double-Quarter Wave (DQW) crab cavities. A DQW cavity is a new generation of…

The wire stretching measurement was completed on the prototype Double Quarter Wave (DQW) crab cavity for operation practice and calibration of the measurement system. Four locations were defined to be on the electrical center plane of the…

We tested the prototype DQW cavity in GERSEMI vertical test stand in FREIA. The performance met the specification, and our experimental procedure and infrastructure are qualified for testing crab cavities in the HL-LHC project. This was the…

A 56 MHz superconducting RF cavity was designed and installed in the Relativistic Heavy Ion Collider (RHIC). It is the first superconducting quarter wave resonator (QWR) operating in a high-energy storage ring. We discuss herein the cavity…

A low loss (LL) type 500 MHz 5-cell superconducting niobium prototype cavity with large beam aperture has been developed successfully including the optimization, the deep drawing and electron beam welding, the surface treatment and the…

A 325MHz beta=0.14 superconducting half wave resonator(HWR) prototype has been developed at the Institute of High Energy Physics(IHEP), which can be applied in continuous wave (CW) high beam proton accelerators. In this paper, the…

Superconducting cavities with low RF frequencies and heavy damping of higher order modes (HOM) are desired for the main accelerator of High Energy Photon Source (HEPS), a 6 GeV synchrotron light source promising ultralow emittance currently…

A 218 MHz quarter wave niobium cavity has been fabricated for the purpose of demonstrating Nb3Sn technology on a low-beta accelerator cavity. Niobiumtin has been established as a promising next generation SRF material, but development has…

Two superconducting quarter-wave resonator (QWR) prototypes have been fabricated and tested. They operate at 80.5 MHz and 161 MHz and are optimised for beta = 0.085 and beta = 0.16, respectively. The prototypes are simplified versions…

Hybrid quantum systems are highly promising platforms for addressing important challenges of quantum information science and quantum sensing. Their implementation, however, is technologically non-trivial, since each component typically has…

Superconducting radio-frequency cavities are commonly used in modern particle accelerators for applied and fundamental research. Such cavities are typically made of high-purity, bulk Nb and are cooled by a liquid helium bath at a…

Crab cavities have been proposed for a wide number of accelerators and interest in crab cavities has recently increased after the successful operation of a pair of crab cavities in KEK-B. In particular crab cavities are required for both…

Three-dimensional (3D) superconducting microwave cavities with large mode volumes typically have high quality factors ($>10^6$). This is due to a reduced sensitivity to surface dielectric losses, which is the limiting source of dissipation…

An electro-optomechanical device capable of microwave-to-optics conversion has recently been demonstrated, with the vision of enabling optical networks of superconducting qubits. Here we present an improved converter design that uses a…

We present an analytically tractable theory of reservoir-engineered refrigeration of a superconducting microwave cavity and map it onto a realistic solid-state implementation based on gate-defined double-quantum-dot (DQD) spin qubits.…

Superconducting microwave cavities with ultra-high Q-factors are revolutionizing the field of quantum computing, offering long coherence times exceeding 1 ms, which is critical for realizing scalable multi-qubit quantum systems with low…

First experimental results of a feasibility study of a gravitational wave detector based on two coupled superconducting cavities are presented. Basic physical principles underlying the detector behaviour and sensitivity limits are…

We present the design of a reflective stop-band filter based on quasi-lumped elements that can be utilized to introduce large dc and low-frequency voltage biases into a low-loss superconducting coplanar waveguide (CPW) cavity. Transmission…

One superconducting taper-type half-wave resonator (HWR) with frequency of 162.5MHz, \b{eta} of 0.09 has been developed at Peking University, which is used to accelerate high current proton ($\sim$ 100mA) and $D^{+}$($\sim$ 50mA). The radio…

The superconducting coplanar waveguide (SCPW) cavity plays an essential role in various areas like superconducting qubits, parametric amplifiers, radiation detectors, and studying magnon-photon and photon-phonon coupling. Despite its…