相关论文: Automatic Retraction and Full Cycle Operation for …
The problem of autonomous launch and landing of a tethered rigid aircraft for airborne wind energy generation is addressed. The system operates with ground-based power conversion and pumping cycles, where the tether is repeatedly reeled in…
Airborne wind energy systems aim to generate renewable energy by means of the aerodynamic lift produced by a wing tethered to the ground and controlled to fly crosswind paths. The problem of maximizing the average power developed by the…
A control design approach to achieve fully autonomous take-off and flight maneuvers with a tethered aircraft is presented and demonstrated in real-world flight tests with a small-scale prototype. A ground station equipped with a controlled…
The control design of an airborne wind energy system with rigid aircraft, vertical take-off and landing, and pumping operation is described. A hierarchical control structure is implemented, in order to address all operational phases:…
The problem of launching a tethered aircraft to be used for airborne wind energy generation is investigated. Exploiting well-assessed physical principles, an analysis of three different take-off approaches is carried out. The approaches are…
Energy harvesting based on tethered kites benefits from exploiting higher wind speeds at higher altitudes. The setup considered in this paper is based on a pumping cycle. It generates energy by winching out at high tether forces, driving an…
An approach to control tethered wings for airborne wind energy is proposed. A fixed length of the lines is considered, and the aim of the control system is to obtain figure-eight crosswind trajectories. The proposed technique is based on…
The design of a prototype to carry out take-off and flight tests with tethered aircrafts is presented. The system features a ground station equipped with a winch and a linear motion system. The motion of these two components is regulated by…
A study on filtering aspects of airborne wind energy generators is presented. This class of renewable energy systems aims to convert the aerodynamic forces generated by tethered wings, flying in closed paths transverse to the wind flow,…
Pumping airborne wind energy (AWE) systems employ a kite to convert wind energy into electricity, through a cyclic reeling motion of the tether. The problem of computing the optimal reeling speed for the sake of maximizing the average cycle…
This chapter provides an introduction to the modeling and control of power generation from wind turbine systems. In modeling, the focus is on the electrical components: electrical machine (e.g. permanent-magnet synchronous generators),…
Airborne wind energy (AWE) systems are tethered flying devices that harvest wind resources at higher altitudes which are not accessible to conventional wind turbines. In order to become a viable alternative to other renewable energy…
The traction force of a kite can be used to drive a cyclic motion for extracting wind energy from the atmosphere. This paper presents a novel quasi-steady modelling framework for predicting the power generated over a full pumping cycle. The…
In this paper, we deal with the power regulation of tethered-wing systems and demonstrate advantages of variable-pitch control in mitigating the dynamic mechanical loads and power fluctuations. The proposed scheme is based on a strategy…
Airborne Wind Energy is a lightweight technology that allows power extraction from the wind using airborne devices such as kites and gliders, where the airfoil orientation can be dynamically controlled in order to maximize performance. The…
Airborne wind energy systems are capable of extracting energy from higher wind speeds at higher altitudes. The configuration considered in this paper is based on a tethered kite flown in a pumping orbit. This pumping cycle generates energy…
We consider a motorized aircraft tethered to a central anchorage point in a configuration similar to a control line model airplane. For this system, we address the problem of automatic take-off and landing (ATOL) with a circular path, whose…
Airborne Wind Energy (AWE) is an emerging technology designed to harness the power of high-altitude winds, offering a solution to several limitations of conventional wind turbines. AWE is based on flying devices (usually gliders or kites)…
The flow speed-up generated by windbreaks can be used to increase the power production of wind turbines. However, due to the increased drag imposed by the windbreaks, their use in large wind turbine arrays has been questioned. We use large…
Ground based, wind energy extraction systems have reached their maximum capability. The limitations of current designs are: wind instability, high cost of installations, and small power output of a single unit. The wind energy industry…