相关论文: A high-resolution TDC-based board for a fully digi…

Rate-dependent effects in the electronics used to instrument the tagger focal plane at the MAX IV Laboratory were recently investigated using the novel approach of Monte Carlo simulation to allow for normalization of high-rate experimental…

We implemented the NaNet FPGA-based PCI2 Gen2 GbE/APElink NIC, featuring GPUDirect RDMA capabilities and UDP protocol management offloading. NaNet is able to receive a UDP input data stream from its GbE interface and redirect it, without…

The TRB hardware module is a multi-purpose Trigger and Readout Board with on-board DAQ functionality developed for the upgrade of the HADES experiment. It contains a single computer chip (Etrax) running Linux as a well as a 100 Mbit/s…

The upgrade of the ATLAS muon spectrometer for high-luminosity LHC requires new trigger and readout electronics for the various elements of the detector. We present the design of a time-to-digital converter (TDC) ASIC prototype for the…

This paper presents a low hardware consumption, resolution-configurable, automatically calibrating Gray code oscillator time-to-digital converter (TDC) in Xilinx 16nm UltraScale+, 20nm UltraScale and 28nm Virtex-7 field-programmable gate…

We present a readout chip prototype for future pixel detectors with timing capabilities. The prototype is intended for characterizing 4D pixel arrays with a pixel size of $100\times100~\mu \text{m}^2$, where the sensors are Low Gain…

Background: The established GADGET detection system, designed for measuring weak, low-energy $\beta$-delayed proton decays, features a gaseous Proton Detector with MICROMEGAS readout for calorimetric particle detection, surrounded by a…

CuboDAQ is a custom data acquisition system to read out SiPM-based detectors. It features electronic boards to digitize the SiPMs signal, an FPGA-based system-on-module board, the connectivity to transmit the data to a central server, and…

The NA62 experiment at CERN SPS is aimed to measure the branching ratio of the ultra-rare decay $K^+\rightarrow\pi^+ \nu \bar{\nu}$ with 10\% accuracy. The experiment operates with a 75 GeV/c high intensity (750 MHz) secondary beam. A new…

The NA62 experiment at CERN utilises a differential Cherenkov counter with achromatic ring focus (CEDAR) for tagging kaons within an unseparated monochromatic beam of charged hadrons. The CEDAR-H detector was developed to minimise the…

We present a Time-to-Digital Converter (TDC) implemented on a 16 nm Xilinx UltraScale Plus FPGA that achieves a resolution of 1.15 ps, RMS precision of 3.38 ps, a differential nonlinearity (DNL) of [-0.43, 0.24] LSB, and an integral…

Muon Spin Rotation, Relaxation and Resonance ({\mu}SR) technology has an irreplaceable role in studying the microstructure and properties of materials, especially micro-magnetic properties. An experimental muon source is being built in…

This paper proposes a high-speed transceiver-based method for implementing a digital-to-time converter (DTC). A real-time decoding technique is introduced to inject time information into high-speed pattern data. The stability of the…

Large LAr TPCs are among the most powerful detectors to address open problems in particle and astro-particle physics, such as CP violation in leptonic sector, neutrino properties and their astrophysical implications, proton decay search…

The paper presents a system for measuring photon statistics and photon timing in the few-photon regime down to the single-photon level. The measurement system is based on superconducting nanowire single photon detectors and a…

As an important part of the field programmable gate array (FPGA) market, Intel FPGA has also great potential for implementation of time-to-digital convertor (TDC). In this paper, the basic tapped delay line (TDL) TDC structure is adapted in…

Development of readout electronics for Time Projection Chamber for a Linear Collider is ongoing under stringent requirements on high channel density, lowest possible power consumption and small material budget. In the studied TPC readout…

The SeaQuest experiment (Fermilab E906) detects pairs of energetic {\mu}+ and {\mu}- produced in 120 GeV/c proton-nucleon interactions in a high rate environment. The trigger system consists of several arrays of scintillator hodoscopes and…

A high-precision charge measurement can be achieved by the area integration of a digitized quasi-Gaussian signal after the signal passes through the shaper and analog-to-digital converter (ADC). The charge measurement contains an error due…

Novel electronic devices can often be operated in a plethora of ways, which makes testing circuits comprised of them difficult. Often, no single tool can simultaneously analyze the operating margins, maximum speed, and failure modes of a…