相关论文: Transient Newton rings in dielectrics upon fs lase…
Ultrashort-pulse laser ablation of metals near damage threshold is governed by homogeneous spallation, in which tensile unloading releases a nanometre-thin liquid film whose optical signatures are temporally evolving concentric Newton rings…
The optical response of nickel is studied in a wide range of laser fluence, below and above the ablation threshold, by selfreflectivity measurements of ultrashort 800nm single laser pulses. At the ablation threshold, the reflectivity…
The mechanism of ablation of solids by intense femtosecond laser pulses is described in an explicit analytical form. It is shown that at high intensities when the ionization of the target material is complete before the end of the pulse,…
We provide measurements of ablation of four post-transition and transition metals (aluminum, copper, nickel and tungsten) irradiated by single 800 nm laser pulses, in ultrashort regime from 100 fs pulse duration down to 15 fs covering a…
Short laser pulse in wide range of wavelengths, from infrared to X-ray, disturbs electron-ion equilibrium and rises pressure in a heated layer. The case where pulse duration $\tau_L$ is shorter than acoustic relaxation time $t_s$ is…
Conventional Newtons rings is generally used in undergraduate laboratory to determine the average wavelength of Na doublet. A minor modification of this setup enables us to view simultaneously Newtons rings both in reflected as well as…
Femtosecond laser ablation is a process that bears both fundamental physics interest and has wide industrial applications. For decades, the lack of probes on the relevant time and length scales has prevented access to the highly…
In this article we report acceleration observed for ions in a forward ablation geometry of 50 nm thick nickel film coated on a glass plate under nanosecond laser ablation. A detailed study with varying background pressure and laser energy…
We review the results of our research on damage mechanisms in materials irradiated with femtosecond free-electron-laser (FEL) pulses. They were obtained using our hybrid approach, XTANT (X-ray-induced Thermal And Nonthermal Transitions).…
We determine the laser-induced ablation threshold fluence in air of aluminum and tungsten excited by single near-infrared laser pulses with duration ranging from 15 fs to 100 fs. The ablation threshold fluence is shown constant for both…
A study of damage and ablation of silicon induced by two individual femtosecond laser pulses of different wavelengths, 1030 and 515 nm, is performed to address the physical mechanisms of dual-wavelength ablation and reveal possibilities for…
We present a numerical model which describes the propagation of a single femtosecond laser pulse in a medium of which the optical properties dynamically change within the duration of the pulse. We use a Finite Difference Time Domain (FDTD)…
We demonstrate that the dispersion of surface plasmon polaritons in a periodically perforated gold film can be efficiently manipulated by femtosecond laser pulses with the wavelengths far from the intrinsic resonances of gold. Using a time-…
We use ultrafast electron crystallography to study structural changes induced in graphite by a femtosecond laser pulse. At moderate fluences of ~< 21mJ/cm^2, lattice vibrations are observed to thermalize on a time scale of ~8ps. At higher…
Ultrafast, femtosecond laser pulse interaction with dielectric materials has shown them to have significantly higher laser fluence threshold requirements, as compared to metals and semiconductors, for laser material modification, such as…
The ability to control the speed and polarisation of light pulses will allow for faster data flow in optical networks of the future. Optical delay and switching have been achieved using slow-light techniques in various media, including…
We present a theoretical analysis of light scattering from a layered metal-dielectric microsphere. The system consists of two spherical resonators, coupled through concentric embedding. Solving for the modes of this system we find that near…
Ultrafast laser breakdown of wide bandgap dielectrics is today a key for major technologies ranging from 3D material processing in optical materials to nanosurgery. However, a contradiction persists between the strongly nonlinear character…
Transparent conducting oxides are highly doped semiconductors that exhibit favourable characteristics when compared to metals, including reduced material losses, tuneable electronic and optical properties, and enhanced damage thresholds.…
The effects of ultra-short laser pulses on reactive Ti/Al nano-layered thin film were investigated. The thin film composed of alternated titanium and aluminium nano-layers, was deposited by ion-sputtering. Single pulse irradiation was…