相关论文: Pt-based nanowire networks with enhanced oxygen-re…
Photoexcited metals can produce highly-energetic hot carriers whose controlled generation and extraction is a promising avenue for technological applications. While hot carrier dynamics in Au-group metals have been widely investigated, a…
A single--pore model for performance of the cathode catalyst layer (CCL) in a PEM fuel cell is developed. The model takes into account oxygen transport though the CCL depth and through the thin Nafion film, separating the pore from Pt/C…
Superconducting nanowire single-photon detectors (SNSPDs) have an absolute advantage over other types of single photon detectors except the low operating temperature. Therefore, many efforts have been devoted to find high-temperature…
Porous electrodes were developed using laser powder bed fusion of Inconel 718 lattice structures and electrodeposition of a porous nickel catalytic layer. Laser energy densities of ~83-333 J/m were used to fabricate ~500 um thick electrodes…
By means of ab-initio calculations, we have investigated the chemisorption paroperties of ethanol onto segregating binary nanoalloys. We select nanostructures with icosahedral shape of 55 atoms with a Pt outermost layer over a M core with…
Bimetallic nanoalloys such as nanoparticles and nanowires are attracting significant attention due to their vast potential applications such as in catalysis and nanoelectronics. Notably, Pd-Pt nanoparticles/nanowires are being widely…
Two-dimensional organic porous networks (2DOPNs) have opened new vistas for tailoring the physicochemical characteristics of metallic surfaces. These typically chemically bound nanoporous structures act as periodical quantum wells leading…
A simple method for the preparation of PdCo@Pd core-shell nanoparticles supported on carbon has been developed using an adsorbate-induced surface segregation effect. The stability and electrocatalytic activity for the oxygen reduction of…
The free standing solid polymer nanocomposite films has been prepared through standard solution cast technique. The improvement in structural, microstructural and electrochemical properties has been observed on the dispersion of nanofiller…
We investigated the electrical conductivity of platinum nanowires with heights ranging from 2 nm to 200 nm, deposited by focused electron beam induced deposition (FEBID). Post-deposition processing was employed to enhance the electrical…
Nanopores (NPs) grown by anodizing can be partially hidden beneath a relatively compact surface oxide layer, which limits the volumetric surface area of these nanostructures. In this work, nitinol (NiTi) alloy was anodized in an electrolyte…
The results of fabrication and characterization of atomic structure of nanocrystalline thin layers of Y2O3 in cubic and monoclinic phases is reported. Experimental data demonstrate crystalline ordering in nanocrystalline films with average…
At present, Pt nanoparticle catalysts in fuel cells suffer from aggregation and loss of chemical activity. In this work, graphdiyne, which has natural porous structure, was proposed as substrate with high adsorption ability to stabilize Pt…
The electronic polarization energies, P = (P+) + (P-), of a PTCDA (perylenetetracarboxylic acid dianhydride) cation and anion in a crystalline thin film on a metallic substrate are computed and compared with measurements of the PTCDA…
We have carried out density functional theory based calculations of the size dependent formation energy and geometry of Pt islands on Ru(0001), to model Pt-Ru nanocatalysts which have been recently proposed as fuel cell anode. The Pt…
Nanomechanical resonators with high quality factors (\Qm{}) enable mechanics-based quantum technologies, in particular quantum sensing and quantum transduction. High-\Qm{} nanomechanical resonators in the kHz to MHz frequency range can be…
We report the properties of molecular beam epitaxy deposited AlBN thin films on a recently developed epitaxial nitride metal electrode Nb2N. While a control AlN thin film exhibits standard capacitive behavior, distinct ferroelectric…
Superconducting properties of thin films can be vastly different from those of bulk materials. Seminal work has shown the critical temperature Tc of elemental superconductors decreases with decreasing film thickness when the normal-state…
Topological crystalline insulator tin telluride (SnTe) provides a rich playground to examine interactions of correlated electronic states, such as ferroelectricity, topological surface states, and superconductivity. Making SnTe into…
High-performance solution-processed short-channel carbon nanotube (CNT) thin film transistors (TFTs) are fabricated using densely aligned arrays of metallic CNTs (m-CNTs) as source and drain electrodes, and aligned arrays of semiconducting…