相关论文: Numerical and Experimental Studies on the Separati…
In this study, we investigate the interaction between vortex rings behind MVG and the oblique shocks in the MVG controlled ramp flow at M=2.5 and Req=5760. Implicit large eddy simulation (ILES) method is used by solving the unfiltered form…
Vortices and their analysis play a critical role in the understanding of complex phenomena in turbulent flows. Traditional vortex extraction methods, notably region-based techniques, often overlook the entanglement phenomenon, resulting in…
A large scale parametric study of the flow over the prolate spheroid is presented to understand the effect of Reynolds number and angle of attack on the separation, the wake formation and the loads. Large-Eddy Simulation is performed for…
Recently, Kami\'nski et al. [1] demonstrated that a two-dimensional streamwise waviness with carefully selected amplitude and period can be effectively used in postponement of a flow separation at high Reynolds number which is out of reach…
Separated flows past complex geometries are modelled by discrete vortex techniques. The flows are assumed to be rotational and inviscid, and a new technique is described to determine the streamfunctions for linear shear profiles. The…
We investigate vortex breakdown (VB) and its dominant topologies in turbulent, non-reacting flows within a canonical swirl combustor using large-eddy simulations (LES). A baseline configuration and operating conditions are first used to…
One of the more promising recent approaches to turbulence modelling is the Variational Multiscale Large Eddy Simulation (VMS LES) method proposed by Hughes et al. [Comp. Visual. Sci., vol. 3, pp. 47-59, 2000]. This method avoids several…
This work is concerned with the numerical investigation of the dynamics of stopping vortex formation in the uniform flow past a wedge mounted on a wall for channel Reynolds number $Re_c=1560$. The streamfunction-vorticity ($\psi$-$\omega$)…
The leading edge vortex (LEV) is one of the most important lift augmentation mechanisms in flapping wing aerodynamics. We propose a methodology that aims to provide a quantitative description of the LEV. The first step of the method…
This study investigates a mechanism of controlling separated flows around an airfoil using a synthetic jet (SJ). A large-eddy simulation (LES) was performed for a leading-edge separation flow around a NACA0015 airfoil at the chord Reynolds…
The formation of the leading-edge vortex (LEV) is a key feature of unsteady flows past aerodynamic surfaces, but is expensive to model in high fidelity computations. Low-order methods based on discrete vortex elements are able to capture…
Recent developments in vortex particle methods for simulating three-dimensional incompressible flows are presented. A lightweight, dynamic Large-Eddy Simulation model is tested, featuring a dynamic procedure that relies solely on Lagrangian…
3D-printed microfluidic devices offer new ways to study fluid dynamics. We present the first clear visualization of vortex breakdown in a dividing T-junction flow. By individual control of the inflow and two outflows, we decouple the…
Topological techniques are used to study the motions of systems of point vortices in the infinite plane, in singly-periodic arrays, and in doubly-periodic lattices. The reduction of each system using its symmetries is described in detail.…
In this paper, we present a framework for multiscale topology optimization of fluid-flow devices. The objective is to minimize dissipated power, subject to a desired contact-area. The proposed strategy is to design optimal microstructures…
Introducing a fluid microjet into the boundary layer to increase fluid momentum and hence delay separation is a method for actively controlling a flow separation region. The present work numerically analyzed the control of a separation…
Over the last decade, substantial progress has been made in understanding the topology of quasi-2D non-equilibrium fluid flows driven by ATP-powered microtubules and microorganisms. By contrast, the topology of 3D active fluid flows still…
This paper addresses reconnection of vortex tubes, with particular focus on the topology of the vortex lines (field lines of the vorticity). This analysis of vortex line topology reveals previously undiscovered features of the reconnection…
A variational technique is used to derive analytical expressions for the sensitivity of several geometric indicators of flow separation to steady actuation. Considering the boundary layer flow above a wall-mounted bump, the six following…
A high order finite difference method is proposed for unstructured meshes to simulate compressible inviscid/viscous flows with/without discontinuities. In this method, based on the strong form equation, the divergence of the flux on each…