相关论文: High Performance Semiconducting Enriched Carbon Na…

Carbon nanotube (CNT) based electronic devices are promising for beyond-silicon solid-state electronics and vacuum micro-nano-electronics. Despite rapid progress in CNT field-effect transistor related solid-state electronics, the…

Molecular level components, like carbon multiwalled nanotubes (MWNT), show great potential for future nanoelectronics. At low frequencies, only the outermost carbon layer determines the transport properties of the MWNT. Due to the…

Transfer printing methods are used to pattern and assemble monolithic carbon nanotube (CNT) thin-film transistors on large-area transparent, flexible substrates. Airbrushed CNT thin-films with sheet resistance 1kOhmsquare^{-1} at 80%…

Random networks of single-walled carbon nanotubes (CNTs) usually contain both metallic (m-CNTs) and semiconducting (s-CNTs) nanotubes with an approximate ratio of 1:2, which leads to a trade-off between on-conductance and on/off ratio. We…

A simple method combining photolithography and shadow (or angle) evaporation is developed to fabricate single-walled carbon nanotube (SWCNT) devices with tube lengths L~10-50 nm between metal contacts. Large numbers of such short devices…

Substantial progress on field effect transistors "FETs" consisting of semiconducting single wall carbon nanotubes "s-SWNTs" without detectable traces of metallic nanotubes and impurities is reported. Nearly perfect removal of metallic…

PMMA and Poly carbonate (PC) are wonderful low cost materials which can be easily tailored and shaped. However they have poor mechanical, thermal and electrical properties which are required to be enhanced in several applications where…

The performance of carbon nanotube (CNT) cables, a contender for copper-wire replacement, is tied to its metallic and semi-conducting-like conductivity responses with temperature; the origin of the semi-conducting-like response however is…

In percolating networks of mixed metallic and semiconducting CNTs, there is a tradeoff between high on-current (dense networks) and high on/off ratio (sparse networks in which the metallic CNT fraction is not percolating). Experiments on…

The electronic properties of multi-wall carbon nanotubes (MWNTs) have attracted much attention because they could lead to nano-sized electronic devices. Using chemical vapor deposition (CVD), MWNTs are produced in large quantities at a low…

We describe a method to fabricate clean suspended single-wall carbon nanotube (SWCNT) transistors hosting a single quantum dot ranging in length from a few 10s of nm down to $\approx$ 3 nm. We first align narrow gold bow-tie junctions on…

We report that entirely end-bonded multi-walled carbon nanotubes (MWNTs) can show superconductivity with the transition temperature Tc as high as 12K that is approximately 40-times larger than those reported in ropes of single-walled…

We perform a detailed analysis of the band structure, phonon dispersion, and electron-phonon coupling of three types of small-radius carbon nanotubes (CNTs): (5,0), (6,0), and (5,5) with diameters 3.9, 4.7, and 6.8 \AA respectively. The…

We demonstrate assembly of solution processed semiconducting enriched (99%) single walled carbon nanotubes (s-SWNT) in an array with varying linear density via ac-dielectrophoresis and investigate detailed electronic transport properties of…

Carbon nanotubes (CNTs) are quasi-1D nanostructures that display both high thermal conductivity and intriguing low-dimensional phonon transport phenomena. In comparison to the advances made in the theoretical calculation of the lattice…

A printing process for high-resolution transfer of all components for organic electronic devices on plastic substrates has been developed and demonstrated for pentacene (Pn), poly (3-hexylthiophene) and carbon nanotube (CNT) thin-film…

Single-walled carbon nanotubes (SWNTs) have been grown via chemical vapor deposition on high-kappa dielectric SrTiO3/Si substrates, and high-performance semiconducting SWNT field-effect transistors have been fabricated using the thin SrTiO3…

Controlled growth, patterning and placement of carbon nanotube (CNT) thin films for electronic applications are demonstrated. The density of CNT films is controlled by optimizing the feed gas composition as well as the concentration of…

Recent advances in nanotechnology have provided new materials which have the potential to surpass copper and aluminum alloys in electrical conductivity, weight and ampacity [2-6]. Among these carbon nanotubes (CNTs) stand out due to their…

The discovery of transparent electrodes led to the development of optoelectronic devices such as OLEDs, LCDs, touchscreens, IR sensors, etc. Since ITO has many drawbacks in respect of its production cost and limited transparency in IR,…