相关论文: Nucleation of austenite in mechanically stabilized…
Motivated by experimental observations of H. Seiner et al., we study the nucleation of austenite in a single crystal of a CuAlNi shape-memory alloy stabilized as a single variant of martensite. In the experiments the nucleation process was…
The reverse martensitic ("austenitic") transformation upon heating of equiatomic nickel-titanium nanoparticles with diameters between 4 and 17 nm is analyzed by means of molecular-dynamics simulations with a semi-empirical model potential.…
This work explains the occurrence of transformation-induced plasticity via stress-assisted martensite, when designing ultrafine-grained duplex steels. It is found that, when the austenite is reduced to a fine scale of about 300 nm, the…
We study through the time evolution of magnetization the low temperature (T) dynamics of the metastable coexisting phases created by traversing different paths in magnetic field (H) and T space in a shape memory alloy system,…
Homogeneous freestanding films have been obtained by the direct current (DC) magnetron sputtering technique using a sacrificial layer. After annealing, the films are crystallized with a strong out-of-plane texture along the (022) direction.…
Using a variational model based on non-linear elasticity we investigate whether in a cubic-to-tetragonal phase transformation it is energetically preferable to nucleate martensite within austenite. Under minimal growth assumptions on the…
The work presents a thermomechanical model for polycrystalline NiTi-based shape memory alloys developed within the framework of generalized standard solids, which is able to cover loading-mode dependent localization of the martensitic…
Solidification control is crucial in manufacturing technologies, as it determines the microstructure and, consequently, the performance of the final product. Investigating the mechanisms occurring during the early stages of nucleation…
A systematic study of magnetic properties of Ni2+xMn1-xGa (0 \le x \le 0.19) Heusler alloys undergoing structural martensite-austenite transformations while in ferromagnetic state has been performed. From measurements of spontaneous…
In situ neutron diffraction of the uniaxial tension test was used to study the effect of the surrounding matrix microstructure on the mechanical stability of retained austenite in high-carbon bearing steels. Comparing the samples with…
Austenite reversion during tempering of a Fe-13.6Cr-0.44C (wt.%) martensite results in an ultrahigh strength ferritic stainless steel with excellent ductility. The austenite reversion mechanism is coupled to the kinetic freezing of carbon…
Additive manufacturing of Ti-6Al-4V alloy via laser powder-bed fusion leads to non-equilibrium $\alpha'$ martensitic microstructures, with high strength but poor ductility and toughness. These properties may be modified by heat treatments,…
Diffusionless phase transitions are at the core of the multifunctionality of (magnetic) shape memory alloys, ferroelectrics and multiferroics. Giant strain effects under external fields are obtained in low symmetric modulated martensitic…
We study the branching of twins appearing in shape memory alloys at the interface between austenite and martensite. In the framework of three-dimensional non-linear elasticity theory, we propose an explicit, low-energy construction of the…
The martensitic transformation is one of the most important phenomena in metals science due to its essential contribution to the strength of steels and most engineering alloys. Yet the basic, atomistic mechanisms leading to martensite…
When a crystalline solid such as iron is cooled across a structural transition, its final microstructure depends sensitively on the cooling rate. For instance, an adiabatic cooling across the transition results in an equilibrium `ferrite',…
This work integrates in-situ neutron diffraction and crystal plasticity finite element modeling to study the kinematic stability of retained austenite in high carbon bearing steels. The presence of a kinematically metastable retained…
We are interested in the energetic cost of a martensitic inclusion of volume $V$ in austenite for the cubic-to-tetragonal phase transformation. In contrast with the work of [Kn\"upfer, Kohn, Otto: Comm. Pure Appl. Math. 66 (2013), no. 6,…
Mechanical properties of steels are significantly enhanced by retained austenite. Particularly, it has been shown that a recently developed heat-treatment technique called Quenching and Partitioning (Q\&P) stabilises austenite effectively.…
Nucleation of a solid in solid is initiated by the appearance of distinct dynamical heterogeneities, consisting of `active' particles whose trajectories show an abrupt transition from ballistic to diffusive, coincident with the…