相关论文: Direct laser printing of thin-film polyaniline dev…

We report on laser printing of conducting polymers directly from the solid phase. Laser Induced Forward Transfer is employed to deposit P3HT:PCBM films on glass/ITO/PEDOT:PSS substrates. P3HT:PCBM is widely used as the active material in…

A novel technique to deposit metals on highly conjugated polyaniline films has been developed. In general, electrodeposition of metals, having low reduction potential, from aqueous solution, is difficult due to disruptive effect of hydrogen…

Micron-thick boron films have been deposited by Pulsed Laser Deposition in vacuum on several substrates at room temperature. The use of high energy pulses (>700 mJ) results in the deposition of smooth coatings with low oxygen uptake even at…

Highly porous Pt/Al thin film electrodes on yttria stabilized zirconia electrolytes were prepared by dealloying of co-sputtered Pt/Al films. The oxygen reduction capability of the resulting electrodes was analyzed in a solid oxide fuel cell…

Recently, nanolaminated ternary carbides have attracted immense interest due to the concomitant presence of both ceramic and metallic properties. Here, we grow nanolaminate Ti3AlC2 thin films by pulsed laser deposition on c-axis-oriented…

A direct electronics printing technique through atomized spraying for patterning room temperature liquid metal droplets on desired substrate surfaces is proposed and experimentally demonstrated for the first time. This method has…

We present a scalable method for direct patterning of graphite and transition metal dichalcogenide (TMD) films on polycarbonate (PC) and other transparent substrates using fiber laser ablation. This process facilitates the fabrication of…

Polymer based printable organic thin film transistor (OTFT) is a viable low cost alternative to amorphous silicon based thin film transistors and possesses light-weight and flexibility advantage. In this paper, we report on the hole…

We demonstrate a facile fabrication technique for graphene-based transparent conductive films. Highly flat and uniform graphene films are obtained through the incorporation of an efficient laser annealing technique with one-time drop…

We report the synthesis of polycrystalline (poly)-SiGe alloy thin films through solid state reaction of Si/Ge multilayer thin films on Si and glass substrates at low temperature of 500 {\deg}C. The pristine thin film was deposited using…

High quality optical thin film materials form a basis for on-chip photonic micro- and nano-devices, where several photonic elements form an optical circuit. Their realization generally requires the thin film to have a higher refractive…

The present work reports the study of the optimized processing conditions of Bi0.9La0.1Fe0.9Mn0.1O3 thin films, grown by RF sputtering on platinum metalized silicon substrates. The combination of deposition at relatively low substrate…

We report on the successful synthesis of highly conductive PdCoO2 ultrathin films on Al2O3 (0001) by pulsed laser deposition. The thin films grow along the c-axis of the layered delafossite structure of PdCoO2, corresponding to the…

Nanostructured TiO2 thin films were prepared by pulsed laser deposition (PLD) on indium doped tin oxide (ITO) substrates. Results from X-ray photoelectron spectroscopy (XPS) show that Ti 2p core level peaks shift toward the lower binding…

The chemical deposition of high-performance Zinc Oxide (ZnO) thin films is challenging, thus significant efforts have been devoted during the past decades to develop cost-effective, scalable fabrication methods in gas phase. This work…

we have fabricated transparent electronic devices based on graphene materials with thickness down to one single atomic layer by the transfer printing method. The resulting printed graphene devices retain high field effect mobility and have…

Electrokinetic phenomena at polymer-water interfaces are central to technologies for water purification, ion separations, and energy conversion, yet the ability to systematically control polymer surface charge and associated electrokinetic…

The thermal deposition and transfer Printing method had been used to produce pentacene thin-films on SiO2/Si and plastic substrates (PMMA and PVP), respectively. X-ray diffraction patterns of pentacene thin films showed reflections…

Epitaxial titanium diboride thin films have been deposited on sapphire substrates by Pulsed Laser Ablation technique. Structural properties of the films have been studied during the growth by Reflection High Energy Electron Diffraction…

The concept of high refractive index subwavelength dielectric nanoresonators, supporting electric and magnetic optical resonances, is a promising platform for waveguiding, sensing, and nonlinear nanophotonic devices. However, high…