相关论文: Thermally induced structural modification in the A…

Dynamic and structural heterogeneities play an important role in glass transition phenomena and in the formation of amorphous structures. Since structure and dynamics are mutually related, it is expected that there exists some relation…

The preparation in thin film form of the known icosahedral phase in Ti-Ni-Zr bulk alloys has been investigated as a function of substrate temperature. Films were deposited by Pulsed Laser Deposition on sapphire substrates at temperatures…

Mg0.29Zn0.71O/ZnO (MZO/ZnO) bilayers were grown on sapphire substrates by pulsed laser deposition at ~ 400 C and were subsequently annealed at different temperatures ranging from ~ 500 to 900 C to allow diffusion of Mg across the interface.…

Al2O3 thin films have been deposited at substrate temperatures between 500{\deg}C to 600{\deg}C by reactive magnetron sputtering using an additional arbitrary substrate bias to tailor the energy distribution of the incident ions. The films…

The enhancement of Neel temperature ($T_N$) of low-$T_{N}$ antiferromagnets in antiferromagnetic bilayers AF1/AF2, where the $T_N$ of AF1 is larger than AF2 (for example enhancement of $T_{N}$ of CoO in CoO/NiO or FeO in FeO/CoO), is a…

The electrical resistivity and the anisotropic magnetoresistance (AMR) was investigated for Ni Co alloys at and below room temperature. The Ni Co alloy layers having a thickness of about 2 um were prepared by electrodeposition on Si wafers…

We study the introduction of a third material, namely Zr, within a nanometric periodic Mg/Co structure designed to work as optical component in the extreme UV (EUV) spectral range. Mg/Co, Mg/Zr/Co, Mg/Co/Zr and Mg/Zr/Co/Zr multilayers are…

Using molecular simulations, we shed light on the mechanism underlying crystal nucleation in metal alloys and unravel the interplay between crystal nucleation and glass transition, as the conditions of crystallization lie close to this…

We report the structural, magnetic, and magnetocaloric properties of Co$_2$Cr$_{1-x}$Ti$_x$Al ($x=$ 0--0.5) Heusler alloys for spintronic and magnetic refrigerator applications. Room temperature X-ray diffraction and neutron diffraction…

Metals in amorphous state are promising for the use as structural materials due to their superior properties related to the absence of grain boundaries and dislocations.Obtaining the amorphous state requires quenching with a high cooling…

Amorphous complexions have recently been demonstrated to simultaneously enhance the ductility and stability of certain nanocrystalline alloys. In this study, three quinary alloys (Cu-Zr-Hf-Mo-Nb, Cu-Zr-Hf-Nb-Ti, and Cu-Zr-Hf-Mo-W) are…

We report a detailed study of the magnetocaloric effect in heterostructures of La2NiMnO6 and La2/3Sr1/3MnO3. The shape, width and magnitude of the temperature dependence of the magnetic entropy change ($\Delta S_{m}$) for these multilayer…

The irradiation stability of Cr based protective coatings on zirconium alloys is critical for the development of accident-tolerant fuel claddings. However, conventional surface irradiation often produces shallow, nonuniform damage,…

In $e$-beam evaporated amorphous silicon ($a$-Si), the densities of two-level systems (TLS), $n_{0}$ and $\overline{P}$, determined from specific heat $C$ and internal friction $Q^{-1}$ measurements, respectively, have been shown to vary by…

Anisotropy in electronic structures may ignite intriguing anisotropic optical responses, as has been well demonstrated in various systems including superconductors, semiconductors, and even topological Weyl semimetals. Meanwhile, it is well…

A two stream model of boron diffusion in silicon has been developed. The model is intended for simulation of transient enhanced diffusion including redistribution of ion-implanted boron during low temperature annealing. The following…

Here, we compare the material quality of AlxIn1-xN layers deposited on Si with different crystallographic orientations, (100) and (111), via radio-frequency (RF) sputtering. To modulate their Al content, the Al RF power was varied from 0 to…

Half-Heusler (HH) phases have garnered much attention as thermally stable and non-toxic thermoelectric materials for power conversion. The most studied alloys to date utilize Hf, Zr, and Ti as the base components. These alloys can achieve a…

. We focused on the interaction between two ferromagnetic cobalt layers through a non-magnetic titanium layer. The magnetic properties of the structure were characterized by ferromagnetic resonance technique (FMR). The data were collected…

We report the superconducting properties of the Co/Pb/Co heterostructures with thin insulating interlayers. The main specific feature of these structures is the intentional oxidation of both superconductor/ferromagnet (S/F) interfaces. We…