相关论文: A combined ultrasonic flow meter and binary vapour…
An upgrade to the ATLAS silicon tracker cooling control system may require a change from C3F8 (octafluoro-propane) to a blend containing 10-30% of C2F6 (hexafluoro-ethane) to reduce the evaporation temperature and better protect the silicon…
Precision sound velocity measurements can simultaneously determine binary gas composition and flow. We have developed an analyzer with custom electronics, currently in use in the ATLAS inner detector, with numerous potential applications.…
Flow measurement in partially filled pipes presents greater complexity compared to fully filled systems, primarily due to the complex velocity distribution within the cross-section, which is a key source of measurement inaccuracy. To…
The planned High Luminosity upgrade to the Large Hadron Collider at CERN aims to increase the instantaneous luminosity peak to about 7.5 x 10^{34} cm^{-2}s^{-1}. The ATLAS detector will be extensively re-designed to meet the challenges of…
The standard gas mixture for the Resistive Plate Chambers (RPC), composed of C2H2F4/i-C4H10/SF6, allows the detector operation in avalanche mode, as required by the high-luminosity collider experiments. The gas density, the low current and…
The ATLAS muon spectrometer is designed to measure muon momenta with a resolution of 4% @ 100 GeV/c rising to 10% @ 1 TeV/c track momentum. The spectrometer consists of precision tracking and trigger chambers embedded in a 2T magnetic field…
We present fabrication of 570-um-thick, millimeter-sized soda-lime-silicate float glass blocks with a 1-um-thick AlN-thin-film piezoelectric transducer sandwiched between thin metallic electrodes and deposited on the top surface. The…
Two methods of flow measurement in stacks are investigated to determine their errors in presence of cyclonic flow. One method, based on velocity measurements with a Pitot tube in a grid of points, is the standard reference method according…
We have developed and characterized two novel micro flow sensors based on measuring the electrical impedance of the interface between the flowing liquid and metallic electrodes embedded on the channel walls. These flow sensors are very…
Experimental and numerical investigations are performed to provide an assessment of the transport behavior of an ultrasonic oscillatory two-phase flow in a microchannel. The work is inspired by the flow observed in an innovative ultrasonic…
The high-luminosity upgrade of the CERN LHC requires the replacement of the CMS tracking detector to cope with the increased radiation fluence while maintaining its excellent performance. An extensive R\&D program, aiming at using 3D pixel…
It is known that ultrasound techniques yield non-intrusive measurements of hydrodynamic flows. For example, the study of the echoes produced by a large number of particle insonified by pulsed wavetrains has led to a now standard velocimetry…
In the present study, by adopting the advantage of ultrasonic techniques, we developed a Multichannel Pulsed Ultrasonic Doppler Velocimetry (MPUDV) to measure the 2D2C velocity fields of liquid metal flow. Due to the specially designed…
For the construction of the ATLAS Inner Tracker strip detector, silicon strip sensor modules are glued directly onto carbon fibre support structures using a soft silicone gel. During tests at temperatures below \unit[-35]{$^{\circ}$C},…
The measurements of flow harmonics $v_2$-$v_6$ using the event plane and two particle correlations methods in broad $p_T$, $\eta$ and centrality ranges using the ATLAS detector at LHC are presented. ATLAS recorded about 9 $\mu…
A new set-up to measure acoustic wave velocities through deforming rock samples at high pressures (up to 1000 MPa), temperatures (up to 700$^\circ$C) and differential stress (up to 1500 MPa) has been developed in a recently refurbished gas…
Using the finite volume CFD software FLUENT, one fan was studied at a given flow rate (1.5m3/min) for three different operational rotating speeds : 2,000, 2,350 and 2,700 rpm. The turbulent air flow analysis predicts the acoustic behavior…
The ALMA observatory is now putting more focus on high-frequency observations (frequencies from 275-950 GHz). However, high-frequency observations often suffer from rapid variations in atmospheric opacity that directly affect the system…
The ALICE collaboration is preparing an upgrade of the three innermost layers of the current Inner Tracking System (ITS) during the next LHC long shutdown (LS3). The new ITS detector will use wafer-scale (up to \SI{27}{cm} in length)…
Lab-on-a-chip (LOC) forms the basis of the new-generation portable analytical systems. LOC allows the manipulation of ultralow flows of liquid reagents and multistep reactions on a microfluidic chip, which requires a robust and precise…