相关论文: Plate Fin Heat Exchanger Model with Axial Conducti…

Extended from its electromagnetic counterpart, transformation thermodynamics applied to thermal conduction equations can map a virtual geometry into a physical thermal medium, realizing the manipulation of heat flux with almost arbitrarily…

Interleaving fins can significantly increase the heat transfer by increasing the effective area per unit base area. The fins are separated uniformly by a gap, which is filled with a flow medium to control the heat flux. The heat flux…

An accurate analysis of the conduction heat transfer in a cryogenic flask is made and some useful formulae are derived. Taking into account the temperature dependence of conductivity and tensile strength of the supporting rods for a helium…

Fluid-structure interaction (FSI) of thin flexible fins coupled with convective heat transfer has applications in energy harvesting and in understanding functioning of several biological systems. We numerically investigate FSI of the thin…

Superconducting radio-frequency (SRF) thin film cavities on copper substrates are employed in several particle accelerators. However, these SRF cavities historically featured a progressive performance degradation with the accelerating field…

We theoretically put forward the concept of a phase-controlled superconducting heat-flux quantum modulator. Its operation relies on phase-dependent heat current predicted to occur in temperature-biased Josephson tunnel junctions. The device…

In this paper, we report the first evidence of an enhancement of the heat transfer from a heated wire by an external turbulent flow of superfluid helium. We used a standard Pt-Rh hot-wire anemometer and overheat it up to 21 K in a…

The Horizontal Test System (HTS) at Fermilab is currently testing fully assembled, dressed superconducting radio frequency (SCRF) cavities. These cavities are cooled in a bath of superfluid helium at 1.8K. Dissipated RF power from the…

Superconducting single-flux-quantum (SFQ) circuits have so far been developed and optimized for operation at or above helium temperatures. The SFQ approach, however, should also provide potentially viable and scalable control and read-out…

This paper aims at the transient heat transfer analysis on extended surfaces with temperature-dependent thermal conductivity, constant internal heat generation, and five different geometries. The governing equations developed in this work…

Two cryogenic bath-type heat exchangers for ultra-pure noble gas applications were developed with particular emphasis on noble gas liquefaction in cryogenic distillation systems. The main objective was to construct heat exchangers for xenon…

In this study, analysis of shell and tube heat exchanger (HE) is performed. Theory part on heat transfer, calculation of heat exchanger and general thermal and hydrological properties are described. Several models are developed and computed…

Multi Layer Capacitors MLCs are considered as the most promising refrigerant elements to design and develop electrocaloric cooling devices. Recently, the heat transfer of these MLCs has been considered. However, the heat exchange with the…

We present a groundbreaking demonstration of thermal modulation in a field-effect-controllable semiconductor-superconductor hybrid structure, wherein the heating mechanism is exclusively radiative. The architecture comprises two reservoirs…

Since the thermal conduction equation has form invariance under coordinate transformation, one can design thermal metamaterials with novel functions by tailoring materials' thermal conductivities. In this work, we establish a different…

In the last several decades, heat transfer enhancements using extended surface (fins) has received considerable attentions. A new heat transfer enhancement technique, longitudinal vortex generators (LVG), has received significant attention…

Quantum heat transfer through a generic superconducting set-up consisting of a tunable transmon qubit placed between resonators that are termined by thermal reservoirs is explored. Two types of architectures are considered, a sequential and…

This work establishes a closed-form analysis for two-dimensional transient heat transfer in an absorber plate based on the thermal wave model when the collector starts to work. The method of separation of variables is employed to determine…

Current leads are utilized to deliver electrical power from a room temperature junction mounted on the vacuum vessel to a superconducting magnet located within the vacuum space of a cryostat. There are many types of current leads used at…

This article is concerned with the shape of small devices used to control the heat flowing between a solid and a fluid phase, usually called \textsl{fin}. The temperature along a fin in stationary regime is modeled by a one-dimensional…