相关论文: In-situ synchrotron microtomography reveals multip…
Indentation has been widely used for investigating the mechanical behavior of glasses. However, how the various microscopic properties (such as atomic structure and mechanics) of glass evolve from the immediate contact with the indenter to…
Although molecular dynamics (MD) simulations are commonly used to predict the structure and properties of glasses, they are intrinsically limited to short time scales, necessitating the use of fast cooling rates. It is therefore challenging…
Laser melting, such as that encountered during additive manufacturing (AM), produces extreme gradients of temperature in both space and time, which in turn influence microstructural development in the material. Qualification and model…
The onset of structural arrest and glass formation in a concentrated suspension of silica nanoparticles in a water-lutidine binary mixture near its consolute point is studied by exploiting the near-critical fluid degrees of freedom to…
The short-range structure of an iron doped soda-lime glass was investigated by infrared emissivity spectroscopy from room temperature up to the melt. Quantitative information on the distribution of the Q^n tetrahedral units was obtained by…
The high-pressure dynamics of a computer-modeled silica melt is studied in the framework of the mode-coupling theory of the glass transition (MCT) using static-structure input from molecular-dynamics (MD) computer simulation. The theory…
We report a thorough characterization of the glassy phases of mixtures of succinonitrile and glutaronitrile via dielectric spectroscopy and differential scanning calorimetry. This system is revealed to be one of the rare examples where both…
Melt supercooling leads to glass formation. Liquid-to-liquid phase transitions are observed depending on thermal paths. Viscosity, density and surface tension thermal dependences measured at heating and subsequent cooling show hysteresis…
Amorphization of silicon is crucial to applications in photonics, microelectronics and solar cell technologies. Ultrafast lasers have been used to generate amorphous silicon from crystalline silicon using rapid nonthermal melting and…
Crystalline calcium-aluminates include the phases essential in the setting of Portland cements developed over the last century. It is only within recent decades, however, that calcium-aluminate melts and glasses have begun to attract…
We discuss the microscopic mechanisms by which low-temperature amorphous states, such as ultrastable glasses, transform into equilibrium fluids, after a sudden temperature increase. Experiments suggest that this process is similar to the…
In this paper, small-angle X-ray scattering measurements are used to determine the different compressibility contributions, as well as the isothermal compressibility, in thermal equilibrium in silica glasses having different thermal…
Supercooled liquids exhibit spatial heterogeneity in the dynamics of their fluctuating atomic arrangements. The length and time scales of the heterogeneous dynamics are central to the glass transition and influence nucleation and growth of…
This Perspective critically assesses recent advances in ultrafast sintering and highlights open scientific questions and emerging technological opportunities. Mechanistic studies of flash sintering indicate that the flash event initiates as…
We use large-scale simulations to investigate the dynamic fracture of silica and sodium-silicate glasses under uniaxial tension. The stress-strain curves demonstrate that silica glass is brittle whereas the glasses rich in Na show…
We use computer simulations to investigate the static properties of a simple glass-forming fluid in which the positions of a finite fraction of the particles has been frozen in. By probing the equilibrium distribution of the overlap between…
The structural evolution with temperature of pure silica (SiO2), sodium-silicate (5Na2O-95SiO2, 10Na2O-90SiO2 and 25Na2O-75SiO2) and albite (15Na2O-15Al2O3-75SiO2) glasses previously densified from hot compression is monitored with a…
Sintering, as a thermal process at elevated temperature below the melting point, is widely used to bond contacting particles into engineering products such as ceramics, metals, polymers, and cemented carbides. Modelling and simulation as…
We present results from the SPring-8 Angstrom Compact free electron LAser (SACLA) XFEL facility, using a high intensity ($\sim\!10^{20}\,$W/cm$^2$) X-ray pump X-ray probe scheme to observe changes in the ionic structure of silicon induced…
We report for the first time real time in situ and quantitative measurements of the mutarotation reaction of lactose in the solid state. The experiments have been performed by 13C NMR. We show that mutarotation is initiated on heating the…