相关论文: Built-in potential and validity of Mott--Schottky …
We investigated the photocurrent in poly(3-hexylthiophene-2,5-diyl) (P3HT):[6,6]-phenyl-C$_{61}$ butyric acid methyl ester (PCBM) solar cells by applying a pulsed measurement technique. For annealed samples, a point of optimal symmetry…
Mott-Schottky analysis is adapted to determine the built-in bias (Vbi) and doping density (N) of lead sulfide-zinc oxide colloidal quantum dot heterojunction solar cells. We show that charge injection barriers at the solar cell's electrodes…
A general problem arising in computer simulations is the number of material and device parameters, which have to be determined by dedicated experiments and simulation-based parameter extraction. In this study we analyze measurements of the…
Time-dependent measurements of both power conversion efficiency and ultraviolet-visible absorption spectroscopy have been observed for solar cell blends containing the polymer poly(3-hexylthiophene-2,5-diyl) (P3HT) with two different…
The performance of organic solar cells strongly depends on the bulk heterojunction (BHJ) morphology of the photoactive layer. This BHJ forms during the drying of the wet-deposited solution, because of physical processes such as…
In future solar cell technologies, the thermodynamic Shockley-Queisser limit for solar-to-current conversion in traditional p-n junctions could potentially be overcome with a bulk photovoltaic effect by creating an inversion broken symmetry…
Recombination of photogenerated charge carriers in polymer bulk heterojunction (BHJ) solar cells reduces the short circuit current (Jsc) and the fill factor (FF). Identifying the mechanism of recombination is, therefore, fundamentally…
We observe a universal feature in the frequency dependence of intensity modulated photocurrent Iph based on studies of a variety of efficient bulk-heterojunction polymer solar cells (BHJ-PSCs). This feature of Iph appears in the form of a…
Polymer solar cells are considered as very promising candidates for development of photovoltaics of the future. They are cheap and easy to fabricate, however, up to now, they possess fundamental drawback, low effectiveness. In the most…
The physics of organic bulk heterojunction solar cells is studied within a six state model, which is used to analyze the factors that affect current-voltage characteristics, power-voltage properties and efficiency, and their dependence on…
Polymer solar cells are considered as very promising candidates for development of photovoltaics of the future. They are cheap and easy to fabricate. However, up to now, they possess fundamental drawback: low effectiveness. In the most…
Modern photovoltaic devices are often based on a heterojunction structure where two components with different optoelectronic properties are interfaced. The properties of each side of the junction can be tuned by either utilizing different…
Transition metal dichalcogenide (TMD) materials have emerged as promising candidates for thin film solar cells due to their wide bandgap range across the visible wavelengths, high absorption coefficient and ease of integration with both…
Conventional models of planar and bulk heterojunction organic solar cells have been extended by introducing doping in the active layer. We have studied the performance of organic solar cells as a function of dopant concentration. For bulk…
We obtain theoretical expressions for the photocurrent in the Heterojunction solar cells with Intrinsic Thin layer (HIT cells). Our calculations take into account tunneling of electrons and holes through wide-bandgap layers of $\alpha$-Si:H…
We report a charge based model to establish the analytical equation, describing the nature of capacitance-voltage ($C$-$V$) characteristics of organic solar cells under dark condition (or organic diodes) over a wide range of voltage,…
Organic semiconductors possess an intrinsic energetic disorder characteristic, which holds an exceptionally important role for understanding organic photovoltaic (OPV) operation and future optimization. We performed illumination intensity…
We have demonstrated a simple and accurate method for characterizing the capacitance of Graphene/n-Si Schottky junction solar cells (GSSCs) which embed the metal-oxide-semiconductor (MOS) capacitor. We measured two types of GSSCs, one with…
Charge transfer in polymer devices represents a crucial, though highly inaccessible stage of photocurrent generation. In this article we propose studying the properties and behaviour of organic solar cells through the modification of…
Organic solar cells have the potential to be low-cost and efficient solar energy converters, with a promising energy balance. They are made from carbon-based semiconductors, which exhibit favourable light absorption and charge generation…