相关论文: Crystallization of diamond-like carbon to graphene…
The adoption of graphene in electronics, optoelectronics and photonics is hindered by the difficulty in obtaining high quality material on technologically-relevant substrates, over wafer-scale sizes and with metal contamination levels…
The characteristic results by different diagnostics on a typical hydrogenated diamond like carbon (HDLC) film synthesized directly in a capacitatively coupled RF (13.56 MHz) discharge are described. The results show some typical charecteric…
Although defects on graphene can degrade electron transport and its ability for use as a protection layer, they can also be helpful to tailor the local properties or activate new sites for particular adsorbates. Here, carbon vacancy defects…
Irradiation with high-energy ions has been widely suggested as a tool to engineer properties of graphene. Experiments show that it indeed has a strong effect on its transport, magnetic and mechanical characteristics. However, to use ion…
Femtosecond micromachining offers a contact-free and mask-less technique for material patterning. With ultrafast laser irradiation, permanent modifications to the properties of single layer graphene through material ablation or defect…
Irradiation with high energy photons (10.2 - 11.8 eV) was applied to small diamondoids isolated in solid rare gas matrices at low temperature. The photoproducts were traced via UV absorption spectroscopy. We found that upon ionization the…
Amorphous carbon films have been routinely used to enhance the preparation of frozen-hydrated transmission electron microscopy (TEM) samples, either in retaining protein concentration, providing mechanical stability or dissipating sample…
Discovering innovative methods to understand phase transitions, modify phase diagrams, and uncover novel synthesis routes poses significant and far-reaching challenges. In this study, we demonstrate the formation of nanodiamond-like sp3…
We report nanocrystalline carbon impurities coexisting with graphene synthesized via chemical vapor deposition (CVD) on platinum. We observe micron-size island-like impurity layers, which can easily be mistaken for second graphene layers in…
The deposition of boron-doped amorphous carbon thin films on SiO2 substrate was achieved via a focused ion beam-assisted chemical vapor deposition of triphenyl borane (C18H15B) and triphenyl borate (C18H15BO3). The existence of boron in the…
We show that the low-energy electronic structure of graphene under a one-dimensional inhomogeneous magnetic field can be mapped into that of graphene under an electric field or vice versa. As a direct application of this transformation, we…
A body-centered tetragonal carbon (bct-Carbon) allotrope has been predicted to be a transparent carbon polymorph obtained under pressure. The structural transition pathways from graphite to diamond, M-Carbon, and bct-Carbon are simulated…
Graphene modifications with oxygen or hydrogen are well known in contrast to carbon attachment to the graphene lattice. The chemical modification of graphene sheets with aromatic diazonium ions (carbon attachment) is analyzed by confocal…
The first selective growth of graphenic carbon thin films on silicon dioxide is reported. A preliminary e-beam exposure of the substrate is found to strongly affect the process of such films growth. The emphasis is placed on the influence…
This paper reports on the fabrication and characterization of a high purity monocrystalline diamond detector with buried electrodes realized by the selective damage induced by a focused 6 MeV carbon ion beam scanned over a pattern defined…
Fabrication of graphene field effect transistor is described which uses an intrinsic graphene on the surface of as deposited hydrogenated amorphous carbon films. Ambipolar characteristic has been demonstrated typical for graphene devices,…
The creation of nitrogen-vacancy centres in diamond is nowadays well controlled using nitrogen implantation and annealing. Although the high-resolution placement of NV centres has been demonstrated using either collimation through pierced…
The reflectivity of low energy electrons from graphene on copper substrates is studied both experimentally and theoretically. Well-known oscillations in the reflectivity of electrons with energies 0 - 8 eV above the vacuum level are…
Intense femtosecond x-ray pulses produced by an x-ray free-electron laser can trigger irreversible structural transitions in crystalline solids. For instance, irradiation of diamond can lead to graphitization and, at higher deposited doses,…
The development of radiation-tolerant materials capable of maintaining structural, electrical, and thermal stability in extreme, radiation-rich environments remains a critical challenge in materials science. In this work, the effects of 60…