相关论文: Development of an LED reference light source for c…
A highly stable monitoring system based on blue and red light emitting diodes coupled to a distribution network comprised of optical fibers has been developed for an electromagnetic calorimeter that uses lead tungstate crystals readout with…
Nuclear instruments that require precise characterization and calibration of their optical components need well-characterized optical light sources with the desired wavelength, intensity, and directivity. This paper presents a novel…
GaAs-based light-emitting diodes (LEDs) are commonly employed in a variety of applications, including medical imaging, biosensing, optical communications, and night vision. In this paper, we present an alternative application of GaAs-based…
We conduct a thorough study of photometric stereo under nearby point light source illumination, from modeling to numerical solution, through calibration. In the classical formulation of photometric stereo, the luminous fluxes are assumed to…
Lighting is a crucial technology that is used every day. The introduction of the white light emitting diode (LED) that consists of a blue LED combined with a phosphor layer, greatly reduces the energy consumption for lighting. Despite the…
We discuss the use of commercial high-power light emitting diodes (LEDs) as a light source for fluorescence pressure measurements. A relatively broad light emitting spectra of single color LEDs (in comparison with lasers) do not prevent…
Delivering light to an object is one of the key steps in any imaging exercise. Tools such as LEDs and lasers are available to achieve this. These components are integrated into systems such as microscopy, medical imaging, remote sensing,…
Red and green light-emitting diodes (LEDs) had been produced for several decades before blue emitting diodes, suitable for lighting applications, were widely available. Today, we have the possibility of combining the three fundamental…
We demonstrated that an iodine stabilized Distributed Bragg Reflector (DBR) diode based laser system lasing at a wavelength in close proximity to $\lambda = 633\,$nm could be used as an alternative laser source to the He-Ne lasers in both…
Currently, no light source exists which is both narrow-band and speckle-free with sufficient brightness for full-field imaging applications. Light emitting diodes (LEDs) are excellent spatially incoherent sources, but are tens of nanometers…
Gaze tracking is an essential component of next generation displays for virtual reality and augmented reality applications. Traditional camera-based gaze trackers used in next generation displays are known to be lacking in one or multiple…
Planar light-emitting diodes (LEDs) fabricated within a single high-mobility quantum well are demonstrated. Our approach leads to a dramatic reduction of radiative lifetime and junction area with respect to conventional vertical LEDs,…
A light emitting diode (LED) pulser has been developed that can be used for tests or calibration of timing and amplitude sensitivity of particle physics detectors. A comparative study is performed on the components and pulser output…
We present a highly stable light source at telecom wavelengths, based on a short erbium doped fiber. The high stability arises from the high inversion of the Er3+ion population. This source is developed to work as a stable reference in…
We present an ultrahigh-$Q$, solid-silica microrod resonator operated under ambient conditions that supports laser-fractional-frequency stabilization to the thermal-noise limit of $3 \times 10^{-13}$ and a linewidth of 62 Hz. We…
We adapted a conventional microscope for projection photolithography using an ultraviolet (UV) light-emitting diode (LED) as a light source. The use of a UV LED provides the microscope projector with several advantages in terms of…
Diffusion model-based low-light image enhancement methods rely heavily on paired training data, leading to limited extensive application. Meanwhile, existing unsupervised methods lack effective bridging capabilities for unknown degradation.…
We describe the characteristics of low-cost ultra-high-power light emitting diodes (LEDs) for use in optical imaging experiments. We use the LEDs in experiments with bullfrog cardiac tissue and find that the signal-to-noise ratio is…
It is demonstrated that RF current modulation of a frequency stabilized injection-locked diode laser allows the stabilization of an optical cavity to adjustable lengths, by variation of the RF frequency. This transfer cavity may be used to…
We propose a method to continuously frequency shift a target laser that is frequency stabilized by a reference laser, which is several hundreds of nanometers detuned. We demonstrate the technique using the 5S 1/2 to 5P 3/2 to 29D 5/2…