相关论文: Reduction of Hysteresis for Carbon Nanotube Mobili…

In this study, the possible deformation of a single Carbon Nanotube (CNT) ply subjected to a pulsed magnetic field was investigated. In all tests the capacitor bank was charged to 6kJ of energy. A Photon Doppler Velocimetry (PDV) system was…

Carbon nanotubes (CNTs) are quasi-1D nanostructures that display both high thermal conductivity and intriguing low-dimensional phonon transport phenomena. In comparison to the advances made in the theoretical calculation of the lattice…

Carbon nanotube (CNT) electromechanical resonators have demonstrated unprecedented sensitivities for detecting small masses and forces. The detection speed in a cryogenic setup is usually limited by the CNT contact resistance and parasitic…

Sensing technologies have been under research and development for their varied applications from microelectronics to space exploration. With the end of Moores law in sight, there is growing demand for shrinking materials and improving…

We investigate a Quantum Dot (QD) in a Carbon Nanotube (CNT) in the regime where the QD is nearly isolated from the leads. An aluminum single electron transistor (SET) serves as a charge detector for the QD. We precisely measure and tune…

We investigate the piezoresistive effect of carbon nanotubes (CNTs) within density functional theory (DFT) aiming at application-relevant CNTs. CNTs are excellent candidates for the usage in nano-electromechanical sensors (NEMS) due to…

We measure top-gated graphene field effect transistors (GFETs) with nanosecond-range pulsed gate and drain voltages. Due to high-k dielectric or graphene imperfections, the drain current decreases ~10% over time scales of ~10 us, consistent…

The methods of carbon nanotubes (CNTs) growth inside nanoporous materials are among the best candidates to fabricate CNTs with controlled geometrical parameters. We report obtaining CNTs by pyrolysis of sugar water and show that this…

Carbon nanotubes (CNTs) are a promising material for high-performance electronics beyond silicon. But unlike silicon, the nature of the transport band gap in CNTs is not fully understood. The transport gap in CNTs is predicted to be…

The performance of carbon nanotube (CNT) cables, a contender for copper-wire replacement, is tied to its metallic and semi-conducting-like conductivity responses with temperature; the origin of the semi-conducting-like response however is…

We present an empirical model for the nearballistic transport in carbon nanotube (CNT) transistors used as strain sensors. This model describes the intrinsic effect of strain on the transport in CNTs by taking into account phonon scattering…

Using carbon nanotubes (CNTs) produced by chemical vapor deposition, we have explored different strategies for the preparation of carbon nanotube devices suited for electrical and mechanical measurements. Though the target device is a…

A nanoscopic simulation for an acceleration sensor is aimed based on the piezoresistive effect of carbon nanotubes (CNTs). Therefore, a compact model is built from density functional theory (DFT), compared with results of molecular dynamics…

A new method to characterize microwave electromagnetic absorption of a bulk carbon nanotube material is proposed and experimentally evaluated in this paper. The method is based on the measurement of microwave transmission through a…

We report a method for probing electromechanical properties of multiwalled carbon nanotubes(CNTs). This method is based on AFM measurements on a doubly clamped suspended CNT electrostatically deflected by a gate electrode. We measure the…

We present a data-calibrated compact model of carbon nanotube (CNT) field-effect transistors (CNFETs) including contact resistance, direct source-to-drain and band-to-band tunneling currents. The model captures the effects of dimensional…

High-performance solution-processed short-channel carbon nanotube (CNT) thin film transistors (TFTs) are fabricated using densely aligned arrays of metallic CNTs (m-CNTs) as source and drain electrodes, and aligned arrays of semiconducting…

Low-temperature measurements of asymmetric carbon nanotube (CNT) quantum dots are reported. The CNTs are end-contacted with one ferromagnetic and one normal-metal electrode. The measurements show a spin-dependent rectification of the…

We present the design, fabrication and response of humidity sensor based on electrical tunneling through temperature-stabilized nanometer gaps. The sensor consists of two stacked metal electrodes separated by 2.5 nm of vertical air gap.…

Amorphous carbon nanotubes (a-CNT) with up to four walls and sizes ranging from 200 to 3200 atoms have been simulated, starting from initial random configurations and using the Gaussian Approximation Potential [Phys. Rev. B 95, 094203…