相关论文: Geometrical Variation Analysis of an Electrotherma…

This study presents a generic TITOP (Two-Input Two-Output Port) model of a substructure actuated with embedded piezoelectric materials as actuators (PEAs), previously modeled with the FE technique. This allows intuitive assembly of actuated…

This paper aims at the transient heat transfer analysis on extended surfaces with temperature-dependent thermal conductivity, constant internal heat generation, and five different geometries. The governing equations developed in this work…

Funtionalized pentacene, 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene), field-effect transistors(FET's) were made by thermal evaporation or solution deposition method and the mobility was measured as a function of temperature…

We demonstrate here a proof-of-concept experiment that microelectromechanical systems (MEMS) can be actuated using photoelectrowetting. In order to demonstrate this, a 30 \mu m thick aluminum cantilever is actuated using an ordinary white…

Using the tip of a scanning probe microscope as a local electrostatic gate gives access to real space information on electrostatics as well as charge transport at the nanoscale, provided that the tip-induced electrostatic potential is well…

In this paper, an opto-thermal analysis of a moderately heated lightweighted solar telescope mirror is carried out using 3D finite element analysis (FEA). A physically realistic heat transfer model is developed to account for the radiative…

A T-shaped field-effect transistor, made out of a pair of two-dimensional electron gases, is modeled and studied. A simple numerical model is developed to study the electron distribution vs. applied gate voltage for different gate lengths.…

We explore the undamped response of step-voltage driven parallel plates and fixed-fixed microbeams. We consider a third order correction in the parallel plate system as a reduced order system to model mid-plane stretching in fixed-fixed…

The newly proposed microstructural constitutive model for polycrystal viscoplasticity in cold and warm regimes (Motaman and Prahl, 2019), is implemented as a microstructural solver via user-defined material subroutine in a finite element…

Untethered soft robots that locomote using electrothermally-responsive materials like shape memory alloy (SMA) face challenging design constraints for sensing actuator states. At the same time, modeling of actuator behaviors faces steep…

Micro-scanners have been widely used in many optical applications. The micro-scanner presented in this paper uses multimorph-type bending actuators to tilt a square plate mirror. This paper presents a complete analytical model of the…

Thermal transient responses of superconducting magnets can be simulated using the finite element (FE) method. Some accelerator magnets use cables whose electric insulation is significantly thinner than the bare electric conductor. The FE…

Nonlinear dynamics of a two-side electro-statically actuated capacitive micro-beam is studied. The piezoelectric actuation leads to the generation of an axial force along the length of the micro-beam and this is used as a tuning tool to…

In this work, the Cosserat formulation of geometrically exact beam dynamics is extended by adding the electric potential as an additional degree of freedom to account for the electromechanical coupling in the Dielectric Elastomer Actuators…

The dielectric response and structural properties of finite-temperature electron liquids are central to accurately describing the physical behavior of electronic systems. This study presents a robust analytical model for the static…

Geothermal energy, a promising renewable source, relies on efficiently utilizing geothermal reservoirs, especially in Enhanced Geothermal Systems (EGS), where fractures in hot rock formations enhance permeability. Understanding fracture…

Processing maps are key to guiding the thermo-mechanical processing (TMP) of superalloys. However, traditional processing maps are incapable of delimiting failure, which is an essential factor to be concerned about during the TMP of…

In this paper, electrothermal field phenomena in electronic components are considered. This coupling is tackled by multiphysical field simulations using the Finite Integration Technique (FIT). In particular, the design of bonding wires with…

It is well recognized that the miniaturization of electromechanical devices will bring a revolution to humanity in the coming decades synonymous with the effects of miniaturizing electronic devices in those previous. An electromechanical…

A new concept of micromachines has been developed for measuring the mechanical properties of thin metallic films. The actuator is a beam undergoing large internal stresses built up during the deposition process. Al thin films are deposited…