相关论文: Design And Fabrication of Condenser Microphone Usi…
Vibrating membranes are the cornerstone of acoustic technology, forming the backbone of modern loudspeakers and microphones. Acoustic performance of condenser microphone is derived mainly from the membrane's size and achievable static…
In this paper, we introduce a novel approach for effectively reducing nonlinear distortion in single back-plate condenser microphones, i.e., most MEMS microphones, studio recording condenser microphones, and laboratory measurement…
In this study, a new type of thin, compact, and light weighed diaphragm micro-pump has been successfully developed to actuate the liquid by the vibration of a diaphragm. The micro-diaphragm pump with two valves is fabricated in an aluminum…
A new class of wideband bandpass filters based on using thick metallic bars as microwave resonators, instead of common microstrip lines, is presented. These bars provide a series of advantages over fully planar printed technologies,…
Graphene-based devices have shown great promise for several applications. For graphene devices to be used in real-world systems, it is necessary to demonstrate competitive device performance, repeatability of results, reliability, and a…
In order to improve low-frequency characteristics of micro-perforated panel absorbers, sound absorption structures composed of micro-perforated panels and expansion chambers are design, and an optimization design method is constructed based…
In this paper we present a passive and cost-effective method for increasing the frequency range of ultrasound MEMS microphone arrays when using beamforming techniques. By applying a 3D-printed construction that reduces the acoustic aperture…
The recently proposed bianisotropic acoustic metagratings offer promising opportunities for passive acoustic wavefront manipulation, which is of particular interest in flat acoustic lenses and ultrasound imaging at ultra-high frequency…
...Micro perforated elements are innovative acoustic solutions,which silencing effect is based on the dissipation of the acoustic wave energy in a pattern of sub-millimeter apertures. Similarly to fibrous materials the micro-perforated…
Thin low-frequency acoustic absorbers that are economical to produce in large quantities are scarce, and their efficiency is often limited to a narrow frequency range. In this paper, we present opportunities to use highly porous mineral…
Major challenges of micro thermal machines are the thermal insulation and mechanical tolerance in the case of sliding piston. Switching from piston to membrane in microengines can alleviate the latest and lead to planar architectures.…
In traveling-wave parametric amplifiers (TWPAs) low-loss capacitors are necessary to provide 50 $\Omega$ impedance matching to the increased inductance that is brought in by the nonlinear elements used for amplification, be it Josephson…
To reduce the level of thermally generated electrical noise transmitted to superconducting quantum devices operating at 20 mK, we have developed thin-film microwave power attenuators operating from 1 to 10 GHz. The 20 dB and 30 dB…
A small depression is created in a straight optical fiber taper to form a local probe suitable for studying closely spaced, planar microphotonic devices. The tension of the "dimpled" taper controls the probe-sample interaction length and…
We report the experimental demonstration of a class of ultrasonic metasurfaces made of patterned silicon thin wafers partially covered by Si3N4 film that exhibit over 24 dB of sound transmission loss around 0.7 MHz, which is caused by the…
Sensors based on whispering gallery resonators have minute footprints and can push achievable sensitivities and resolutions to their limits. Here, we use a microbubble resonator, with a wall thickness of 500 nm and an intrinsic Q-factor of…
Conoscopic interferometry is a promising detection technique for ultrafast acoustics. By focusing a probe beam through a birefringent crystal before passing it through a polarizer, conoscopic interferences sculpt the spatial profile of the…
The ultra-low mass cylindrical drift chamber designed for the MEG II experiment is a challenging apparatus made of 1728 phi = 20 micron gold plated tungsten sense wires, 7680 phi = 40 micron and 2496 phi = 50 micron silver plated aluminum…
Whispering-gallery-mode (WGM) microcavities have emerged as a promising alternative to traditional ultrasound probes, offering high sensitivity and wide bandwidth. In our research, we propose a novel silica WGM microprobe device, with…
Graphene has extremely low mass density and high mechanical strength, key qualities for efficient wide-frequency-response electrostatic audio speaker design. Low mass ensures good high frequency response, while high strength allows for…