相关论文: A comparison of finite element and atomistic model…
Intergranular fracture in polycrystals is often simulated by finite elements coupled to a cohesive-zone model for the interfaces, requiring cohesive laws for grain boundaries as a function of their geometry. We discuss three challenges in…
Finite element calculations of dynamic fracture based on embedding cohesive surfaces in a continuum indicate that the predictions are sensitive to the cohesive law used. Simulations were performed on a square block in plane strain with an…
This study evaluates four widely used fracture simulation methods, comparing their computational expenses and implementation complexities within the Finite Element (FE) framework when employed on heterogeneous solids. Fracture methods…
Atomic diffusion affects the properties of various engineering materials, which predominantly occur in the polycrystalline state. A rigorous description of polycrystalline diffusion must therefore account for crystallographic defects,…
Discrete Element Methods (DEM) are a useful tool to model the fracture of cohesive granular materials. For this kind of application, simple particle shapes (discs in 2D, spheres in 3D) are usually employed. However, dealing with more…
This work proposes an investigation of the fracturing behavior of polymer nanocomposites. Towards this end, the study leverages the analysis of a large bulk of fracture tests from the literature with the goal of critically investigating the…
Cohesive laws are stress-strain curves used in finite element calculations to describe the debonding of interfaces such as grain boundaries. It would be convenient to describe grain boundary cohesive laws as a function of the parameters…
Purpose - The purpose of this paper is to describe finite element modelling for fracture and fatigue behaviour of zirconia toughened alumina microstructures. Design/methodology/approach - A two-dimensional finite element model is developed…
Mixed atomistic and continuum methods offer the possibility of carrying out simulations of material properties at both larger length scales and longer times than direct atomistic calculations. The quasi-continuum method links atomistic and…
We have developed a simulation technique that uses non-linear finite element analysis and elastic fracture mechanics to compute physically plausible motion for three-dimensional, solid objects as they break, crack, or tear. When these…
In the present thesis, a computational framework for the analysis of the deformation and damage phenomena occurring at the micro-scale of polycrystalline materials is presented. Micro-mechanics studies are commonly performed using the…
We present a simple set of data structures, and a collection of methods for constructing and updating the structures, designed to support the use of cohesive elements in simulations of fracture and fragmentation. Initially all interior…
This paper describes a two-dimensional (2D) finite element simulation for fracture and fatigue behaviours of pure alumina microstructures such as those found at hip prostheses. Finite element models are developed using actual Al2O3…
While crack nucleation and propagation in the brittle or quasi-brittle regime can be predicted via variational or material-force-based phase field fracture models, these models often assume that the underlying elastic response of the…
An innovative image analysis technique is proposed to process real solar cell pictures, identify grains and grain boundaries in polycrystalline Silicon, and finally generate finite element meshes. Using a modified intrinsic cohesive zone…
This work outlines a diffuse interface method for the study of fracture and fragmentation in ductile metals at high strain-rates in Eulerian finite volume simulations. The work is based on an existing diffuse interface method capable of…
We study experimentally the fracture mechanisms of a model cohesive granular medium consisting of glass beads held together by solidified polymer bridges. The elastic response of this material can be controlled by changing the cross-linking…
We present a combined phase field and cohesive zone formulation for hydrogen embrittlement that resolves the polycrystalline microstructure of metals. Unlike previous studies, our deformation-diffusion-fracture modelling framework accounts…
We test and simulate the mesoscopic cracking behavior of specimens made of a standard concrete mixture. To this end, we combine stable wedge-splitting fracture experiments performed during X-ray tomography, their analysis with digital…
Numerical simulations of brittle fracture using phase-field approaches often employ a discrete approximation framework that applies the same order of interpolation for the displacement and phase-field variables. Most common is to use linear…