Related papers: Mixing with the radiofrequency single-electron tra…
In this Letter, we study the transient electron transfer phenomena of single-electron devices with alternating external gate voltages. We obtain a high frequency limit for pumping electrons one at a time in single-electron devices. Also, we…
We develop a compact four-port superconducting switch with a tunable operating frequency in the range of 4.8 GHz -- 7.3 GHz. Isolation between channel exceeds 20~dB over a bandwidth of several hundred megahertz, exceeding 40 dB at some…
This article presents a heterodyne experiment which uses a 380-520 GHz planar circuit balanced Nb-$\mathrm{Al_2O_3}$-Nb superconductor-insulator-superconductor (SIS) quasiparticle mixer with 4-8 GHz instantaneous intermediate frequency (IF)…
In this paper, we realize the transmitter of high frequency (HF) bidirectional transceiver radio. A bidirectional transceiver (Bitx) consists of a transmitter and receiver, in which some common circuits are used together by the transmitter…
Classical beamforming techniques rely on highly linear transmitters and receivers to allow phase-coherent combining at the transmitter and receiver. The transmitter uses beamforming to steer signal power towards the receiver, and the…
In the race towards "beyond 6G" telecommunication platforms, magnonics emerges as a promising solution due to its wide tunability within the FR3 band (7-24 GHz). So far, however, the need for an external magnetic bias field to allow the…
Silicon modulators have garnered considerable attention owing to their potential applications in high-density integration and high-speed modulation. However, they are increasingly challenged by the limited 3 dB bandwidth as the demand for…
Up-to-date network telemetry is the key enabler for resource optimization by capacity scaling, fault recovery, and network reconfiguration among other means. Reliable optical performance monitoring in general and, specifically, the…
The authors demonstrate readout of electrically detected magnetic resonance at radio frequencies by means of an LCR tank circuit. Applied to a silicon field-effect transistor at milli-kelvin temperatures, this method shows a 25-fold…
The sensitivity of direct terahertz detectors based on self-mixing of terahertz electromagnetic wave in field-effect transistors is being improved with noise-equivalent power close to that of Schottky-barrier-diode detectors. Here we report…
An 8 x 8 mixed-signal matrix multiplier architecture based on 64 hybrid capacitor-resistor multiplying digital to analogue converters implemented in a 65 nm CMOS technology was developed for the application of blind source separation of…
A monolithic multi-channel analog transient recorder, implemented using switched capacitor sample-and-hold circuits and a high-speed analogically-adjustable delay-line-based write clock, has been designed, fabricated and tested. The 2.1 by…
A mechanical electroscope based on a change in the resonant frequency of a cantilever one micron in size in the presence of charge has recently been fabricated. We derive the decoherence rate of a charge superposition during measurement…
A single-electron transistor (SET) can be used as an extremely sensitive charge detector. Mechanical displacements can be converted into charge, and hence, SETs can become sensitive detectors of mechanical oscillations. For studying…
Creating a transmon qubit using semiconductor-superconductor hybrid materials not only provides electrostatic control of the qubit frequency, it also allows parts of the circuit to be electrically connected and disconnected in situ by…
We report on the realization of a high sensitivity RF noise measurement scheme to study small current fluctuations of mesoscopic systems at milliKelvin temperatures. The setup relies on the combination of an interferometric ampli- fication…
Integrating nano-scale objects, such as single molecules or carbon nanotubes, into impedance transformers and performing radio-frequency measurements allows for high time-resolution transport measurements with improved signal-to-noise…
Single electron Sensitive Read Out (SiSeRO) is a novel on-chip charge detection technology that can, in principle, provide significantly greater responsivity and improved noise performance than traditional charge coupled device (CCD)…
Time-Division Multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in…
A 16-element, compact phased array transceiver is demonstrated at E-band (71-76 and 81-86GHz). A Weaver image selection architecture reduces the LO tuning range to 3GHz while covering the 10GHz band. The bidirectional and efficient…