Related papers: High Breakdown Field Multi-kV UWBG AlGaN Transisto…

We report on the design and demonstration of ultra-wide bandgap (UWBG) AlGaN-channel metal-insulator heterostructure field effect transistors (HEFTs) for high-power, high-frequency applications. We find that the integration of gate…

We report the design and demonstration of ultra-wide-bandgap (UWBG) AlGaN polarization-graded field-effect transistors (PolFETs) that achieve a current-gain cutoff frequency above 85 GHz and a current density exceeding 1.3 A/mm. Ultra-thin…

We report ultra-wide bandgap (UWBG) AlGaN heterostructure field-effect transistors (HFETs) exhibiting a high breakdown field (> 5.3 MV/cm) and a low contact resistance (~1.55 {\Omega}mm), tailored for high-power radiofrequency applications.…

We report on the design and demonstration of ultra-wide bandgap AlGaN polarization-graded field effect transistors with ultra-thin channels to enable excellent current density and high-frequency performance while significantly reducing…

High Electron Mobility Transistors (HEMTs) are most suitable for harsh environments as they operate reliably under extreme conditions such as high voltages, high temperatures, radiation exposure and corrosive atmospheres. In this article,…

We report on energy bands and breakdown characteristics of Al2O3 dielectrics on ultra-wide bandgap (UWBG) AlGaN heterostructures. Metal-dielectric-semiconductor structures are important to sustain high fields needed for future…

Next-generation high-power radio-frequency (RF) devices increasingly demand transistors that operate efficiently with high gain at high frequencies. High-aluminum-content ultra-wide-bandgap (UWBG) AlGaN alloys have shown great potential for…

High voltage (~2 kV) AlGaN-channel HEMTs were fabricated with 64% Aluminum composition in the channel. The average on-resistance was ~75 ohm. mm (~21 miliohm. cm^2) for LGD = 20 microns. Breakdown voltage reached >3 kV (tool limit) before…

We report on ultra-wide bandgap (UWBG) Al0.75Ga0.25N channel metal-insulator-semiconductor field-effect transistors (MISFET) with heterostructure engineered low-resistance ohmic contacts. The low intrinsic electron affinity of AlN (0.6 eV)…

Ultra-wide bandgap (UWBG) materials hold immense potential for high-power RF electronics and deep ultraviolet photonics. Among these, AlGaN emerges as a promising candidate, offering a tunable bandgap from 3.4 eV (GaN) to 6.1 eV (AlN) and…

To meet the growing demands of advanced electronic systems, next-generation power and RF semiconductor devices must operate efficiently at higher power levels and switching frequencies while remaining compact. Current state-of-the-art GaN…

In this letter, we design and demonstrate an improved MOCVD grown reverse Al-composition graded contact layer to achieve low resistance contact to MOCVD grown ultra-wide bandgap (UWBG) Al0.70Ga0.30N channel metal semiconductor field-effect…

We report a polarization-induced 2D electron gas (2DEG) at an epitaxial AlBN/GaN heterojunction grown on a SiC substrate. Using this 2DEG in a long conducting channel, we realize ultra-thin barrier AlBN/GaN high electron mobility…

GaN-based lateral Schottky diodes (SBDs) have attracted great attention for high-power applications due to its combined high electron mobility and large critical breakdown field. However, the breakdown voltage (BV) of the SBDs are far from…

We report the first realization of molecular beam epitaxy grown strained GaN quantum well field-effect transistors on single-crystal bulk AlN substrates. The fabricated double heterostructure FETs exhibit a two- dimensional electron gas…

The lattice mismatch between AlGaN and AlN substrates limits the design and efficiency of UV LEDs, but it can be mitigated by the co-incorporation of boron. We employ hybrid density functional theory to investigate the thermodynamic,…

Ultra-wide bandgap (UWBG) materials such as AlN and BN hold great promise for future power electronics due to their exceptional properties. They exhibit large bandgaps, high breakdown fields, high thermal conductivity, and high mechanical…

Device based on GaN have great potential for high power switching applications due to its high breakdown field and high electron mobility. In this work, we present the device design of a vertical GaN-on-GaN PN power diode using high…

In this letter, we demonstrate the first BN/Graphene/BN field effect transistor for RF applications. The BN/Graphene/BN structure can preserve the high mobility of graphene, even when it is sandwiched between a substrate and a gate…

In this paper, we propose a novel S/D engineering for dual-gated Bilayer Graphene (BLG) Field Effect Transistor (FET) using doped semiconductors (with a bandgap) as source and drain to obtain unipolar complementary transistors. To simulate…