Related papers: Performance of FPGA controller in ISAC-1 accelerat…

This paper presents a novel circuit level model that explains and confirms the extra combinational delays in a SRAM-FPGA (Virtex-5) due to radiation, which matches the experimental results by proton irradiation at TRIUMF.

Reset elements are nonlinear filters that improve control performance beyond linear time-invariant (LTI) limits but introduce higher-order harmonics that complicate design. Although frequency-domain tools like describing functions (DFs) and…

In advanced tokamak scenarios, active feedback control of unstable resistive wall modes (RWM) may be required. A RWM is an instability due to plasma kink at higher plasma pressure, moderated by the presence of a resistive wall surrounding…

We report on a traceable calibration system for a 3500mm-long console that carries a measurement system for inspecting the diameter of a circular reactor chassis. The system uses two single-pass laser interferometers with homodyne fringe…

This study proposes a radar-centric integrated sensing and communication (ISAC) system utilizing a two-layer modulation scheme for vehicular networks. Frequency-modulated continuous wave (FMCW) chirps are jointly modulated via phase…

This paper presents an adaptive control approach for uncertain nonlinear systems subject to safety constraints that allows for modularity in the selection of the parameter estimation algorithm. Such modularity is achieved by unifying the…

Fringe field effects are computed from simulated and measured quadrupole magnetic field gradients, enabling a more realistic modelling of the medium energy section optics in TRIUMF's RIB postaccelerator. Quantifying the fringe field optics…

The main linacs of the ILC consist of nine-cell cavities based on the TESLA design. In order to facilitate reaching higher gradients we have re-designed the cavity shape. This leads to a reduction, comparable to several current designs, in…

We present the development of the FBCM23 ASIC designed for the Phase-II upgrade of the Fast Beam Condition Monitoring (FBCM) system built at the CMS experiment which will replace the present luminometer based on the BCM1F ASIC [1]. The FBCM…

The first version of digital low level RF (DLLRF) for the Diamond Light Source storage ring and booster was developed with ALBA Synchrotron. Six systems have been built so far. Two of them are in routine operation controlling two normal…

The design and performance of wave union TDC implemented in a Lattice CertusPro-NX FPGA is discussed. This FPGA is available for radiation tolerant applications. The TDC is implemented with 16-channels and a 200 MHz reference clock. Each…

Many dedicated embedded processors do not have memory or computational resources to coexist with traditional (host-based) security solutions. As a result, there is interest in using out-of-band analog side-channel measurements and their…

For the CLIC two-beam scheme, a high-current, long-pulse drive beam is required for RF power generation. Taking advantage of the 3 GHz klystrons available at the LEP injector once LEP stops, a 180 MeV electron accelerator is being…

This paper introduces the first low-power hardware accelerator for Spiking Transformers, an emerging alternative to traditional artificial neural networks. By modifying the base Spikformer model to use IAND instead of residual addition, the…

This paper presents the uTCA4.0-based BPM electronics for PIP-II, featuring four 250 MSPS ADCs and a Xilinx UltraScale+ MPSoC FPGA with 10 GbE uplink. Design elements include signal conditioning, clock, and thermal management. The FPGA…

The high instantaneous luminosities expected following the upgrade of the Large Hadron Collider (LHC) to the High Luminosity LHC (HL-LHC) pose major experimental challenges for the CMS experiment. A central component to allow efficient…

In order to double the positron injection rate into the KEKB ring, a two-bunch acceleration scheme has been studied at the linac, in which bunches separated by 96 ns are accelerated in 50 Hz. In this scheme the stabilization of energy and…

Field-Programmable Gate Arrays (FPGAs) are widely used in the central signal processing design of the Square Kilometre Array (SKA) as acceleration hardware. The frequency domain acceleration search (FDAS) module is an important part of the…

This paper introduces harmonic control Lyapunov barrier functions (harmonic CLBF) that aid in constrained control problems such as reach-avoid problems. Harmonic CLBFs exploit the maximum principle that harmonic functions satisfy to encode…

In this paper, an incremental selective decode-and-forward (ISDF) relay strategy is proposed for power line communication (PLC) systems to improve the spectral efficiency. Traditional decode-and-forward (DF) relaying employs two time slots…