Related papers: Wurtzite III-nitride distributed Bragg reflectors …
Distributed Bragg reflectors (DBRs) composed of an AlN/AlGaN superlattice were grown of Si (111) substrates. The first high-reflectance III-nitride DBR on Si was achieved by growing the DBR directly on the Si substrate to enhance the…
High-reflectance group III-nitride distributed Bragg reflectors (DBRs) were deposited by MOCVD on Si (111) substrates. A reflectance greater than 96% was demonstrated for the first time for an AlN/GaN DBR with a stop-band centered in the…
High quality 940 nm Al$_x$Ga$_{1-x}$As n-type distributed Bragg reflectors (DBRs) were successfully monolithically grown on off-cut Ge (100) substrates. The Ge-DBRs have reflectivity spectra comparable to those grown on conventional bulk…
We report the fabrication of monolithically integrated 940 nm AlGaAs distributed Bragg reflectors (DBRs) on graded GaAsP/Si substrates. Low-density surface bumps and cross-hatch patterns were observed on the DBR surfaces. Cross-sectional…
High quality AlxGa1-xAs distributed Bragg reflectors (DBRs) were successfully monolithically grown on on-axis Si (100) substrates via a Ge layer formed by aspect ratio trapping (ART) technique. The GaAs/ART-Ge/Si-based DBRs have…
We demonstrate epitaxial lattice-matched Al$_{0.89}$Sc$_{0.11}$N/GaN ten and twenty period distributed Bragg reflectors (DBRs) grown on c-plane bulk n-type GaN substrates by plasma-enhanced molecular beam epitaxy (PA-MBE). Resulting from a…
Nanowires (NWs) with a unique one-dimensional structure can monolithically integrate high-quality III-V semiconductors onto Si platform, which is highly promising to build lasers for Si photonics. However, the lasing from…
Distributed bragg reflectors (DBRs) consisting of ZnO and amorphous silicon (a-Si) were prepared by magnetron sputtering method for selective light trapping. The quarter-wavelength ZnO/a-Si DBRs with only 6 periods exhibit a peak…
Since the technological breakthrough prompted by the inception of light emitting diodes based on III-nitrides, these material systems have emerged as strategic semiconductors not only for the lighting of the future, but also for the new…
We report on the realization of a high quality distributed Bragg reflector with both high and low refractive index layers lattice matched to ZnTe. Our structure is grown by molecular beam epitaxy and is based on binary compounds only. The…
The combination of grating-based frequency-selective optical feedback mechanisms, such as distributed feedback (DFB) or distributed Bragg reflector (DBR) structures, with quantum dot (QD) gain materials is a main approach towards…
The structural and optical properties of 3 different kinds of GaAs nanowires with 100% zinc-blende structure and with an average of 30% and 70% wurtzite are presented. A variety of shorter and longer segments of zinc-blende or wurtzite…
High quality n-type AlGaAs distributed Bragg reflectors (DBRs) and lnGaAs multiple quantum wells were successfully monolithically grown on 4-inch off-cut Ge (100) wafers. The grown structures have photoluminescence spectra and reflectance…
Distributed Bragg Reflectors (DBR) are well-established photonic structures that are used in many photonic applications. However, most of the DBRs are based on different materials or require post-process etching which can hinder integration…
We explore an alternative way to fabricate (In,Ga)N/GaN short-period superlattices on GaN(0001) by plasma-assisted molecular beam epitaxy. We exploit the existence of an In adsorbate structure manifesting itself by a…
A new platform for fabricating polariton lasers operating at room temperature is introduced: nitride-based distributed Bragg reflectors epitaxially grown on patterned silicon substrates. The patterning allows for an enhanced strain…
We report a new biphasic crystalline wurtzite/zinc-blende homostructure in gallium nitride nanowires. Cathodoluminescence was used to quantitatively measure the wurtzite and zinc-blende band gaps. High resolution transmission electron…
Distributed Bragg reflectors (DBRs) are one of the basic photonic structures used to define microcavities for fundamental light-matter coupling studies, as well as to optimize performance of optoelectronic and photonic devices, e.g., lasers…
Fabrication of porous GaN distributed Bragg reflectors (DBRs) via the selective electrochemical etching (ECE) of conductive Si-doped layers, separated by non-intentionally doped (NID) layers, provides a straightforward methodology for…
Most III-nitride semiconductors are grown on non-lattice-matched substrates like sapphire or silicon due to the extreme difficulty of obtaining a native GaN substrate. We show that several layered transition-metal dichalcogenides are…