Related papers: A simple method to prepare deuterated targets for …
We report about a nuclear track imaging system which is designed to study in detail the ionization topology of charged particle tracks in a low-pressure gas. The detection method is based on a time projection chamber (TPC) filled with…
Generally, the conditions for deep sub-Doppler laser cooling do not match the conditions for the strong atomic localization that takes a place in deeper optical potential and, in consequence, leads to larger temperature. Moreover, for a…
Deflecting an asteroid from an Earth impact trajectory requires only small velocity changes, typically of the order of microns per second, if done many years ahead of time. For this, a highly precise method of determining the need,…
Niobium nitride (NbN) is a useful material for fabricating detectors because of its high critical temperature and relatively high kinetic inductance. In particular, NbN can be used to fabricate nanowire detectors and mm-wave transmission…
The fabrication of optically smooth thin Sn films by vacuum or electrodeposition techniques is usually challenging. Little has been published on how to address this challenge mainly because very few applications require such smooth Sn…
High–quality epitaxial YNixMn1-xO3 thin films have been successfully grown on SrTiO3 (100) (STO) by pulsed laser deposition. X-ray diffraction studies showed that the films deposited on STO are fully c-axis oriented and exhibit…
The Time Projection method is an ideal candidate to track low energy release particles. Large volumes can be readout by means of a moderate number of channels providing a complete 3D reconstruction of the charged tracks within the sensitive…
The principle of using strongly scattering materials to recover efficiency in neutron detectors, via back-scattering of unconverted thermal neutrons, is discussed in general. Feasibility of the method is illustrated through Geant4-based…
Nucleon-deuteron ($Nd$) scattering can be used to constrain three-nucleon forces in chiral effective field theory ($\chi$EFT). However, high-fidelity calculations, such as the Hyperspherical Harmonic (HH) method, are computationally…
The cross sections of high energy neutron-induced spallation is useful for studying the transmutation of long-life fission products. However, due to the difficulty of obtaining high-energy neutrons, the experimental data are still scarce.…
A new procedure to prepare isomerically clean samples of ions with a mass resolving power of more than 100,000 has been developed at the JYFLTRAP tandem Penning trap system. The method utilises a dipolar rf-excitation of the ion motion with…
The use of Thin-foil proton recoil (TPR) spectrometers to measure neutrons from Deuterium-Tritium (DT) fusion plasma has been studied previously and is a well established technique for neutron spectrometry. The study presented here focuses…
The deposition of atomically thin highly uniform chemically derived graphene (CDG) films on 300 mm SiO2/Si wafers is reported. We demonstrate that the very thin films can be lifted off to form uniform membranes than can be free-standing or…
Emerging studies are geared toward exploring new methods of nuclear rocket propulsion to provide more efficient space transit beyond Earth's orbit. One method is to employ a Fission Fragment Rocket Engine utilizing fissionable layers…
Measuring thermal properties of materials is not only of fundamental importance in understanding the transport processes of energy carriers (electrons and phonons) but also of practical interest in developing novel materials with desired…
A novel composite, scintillating material intended for neutron detection and composed of small (1.5 mm) cubes of KG2-type lithium glass embedded in a matrix of scintillating plastic has been developed in the form of a 2.2 in.-diameter, 3.1…
A systematic study of the attenuation of electromagnetic radiation in Nuclear Track Detectors (NTDs) is carried out. The attenuation of gamma-ray, X-ray, UV, visible, and infrared radiation in NTDs are investigated using NaI(Tl) detector,…
High-precision particle tracking devices allow for two-dimensional analyses of the material budget distribution of particle detectors and their periphery. In this contribution, the material budget of different targets is reconstructed from…
It is well established that stellar effective temperatures determined from photometry and spectroscopy yield systematically different results. We describe a new, simple method to correct spectroscopically derived temperatures ("excitation…
Different thicknesses of cobalt thin films were growth by magnetron sputtering deposition techniques. The films thicknesses were determinated with X ray Photoelectron Spectroscopy (XPS) and Quartz Crystal Monitoring (QCM). XPS is also used…