Related papers: A simple method to prepare deuterated targets for …
Thin, uniform arsenic targets suitable for high-fidelity cross section measurements in stacked-target experiments were prepared by electrodeposition of arsenic on titanium backings from aqueous solutions. Electrolytic cells were constructed…
The detailed process of preparing enriched $^{108}$Cd targets on mylar and copper backing using the vacuum evaporation technique is described. These targets were employed in an experiment to measure the proton capture cross-section at…
A method is reported for measuring the thickness and uniformity of thin films of solidified gas targets. The energy of alpha particles traversing the film is measured and the energy loss is converted to thickness using the stopping power.…
This work aims to identify common challenges in the preparation of the blister test devices designed for measurement of energy release rate for brittle thin films and to propose easy-to-implement solutions accordingly. To this end, we…
Resistive heating and mechanical rolling methods have been employed to prepare isotopically enriched thin target foils of 116Sn (~380 \mu g/cm2), 124Sn(~400 \mu g/cm2) and thicker foils of 112Sn (1.7 mg/cm2),120Sn (1.6 mg/cm2),respectively.…
The synthesis and application of deuterated polystyrene (dps) films is discussed. Ultracold neutron storage properties and the Fermi potential of dps films is measured with the result that Tstore=700 +/- 200 sec for dps in the bottle used…
Rutherford backscattering and particle induced x-ray emission have been utilized to precisely characterize targets used in nuclear fission experiments. The method allows for a fast and non destructive determination of target thickness,…
The paper reviews the characterization's techniques for solid targets used in nuclear physics with special emphasis on actinide targets. The determination of the thickness, isotopic and chemical composition are described for actinide…
The LiF target preparation on self-supporting Ag backing (LiF/Ag) is discussed in a detailed manner using vacuum evaporation process. The target thickness is measured using the energy loss of three line alpha source. 183.74 {\mu}g/cm 2…
We report a novel method for depositing patterned dielectric layers with sub-micron features using atomic layer deposition (ALD). The patterned films are superior to sputtered or evaporated films in continuity, smoothness, conformality, and…
High quality ZnO thin films were gown using the pulsed laser deposition technique on (0001) Al$_2$O$_3$ substrates in an oxidizing atmosphere, using a Zn metallic target. We varied the growth conditions such as the deposition temperature…
Thick target deuteron breakup is a variable-energy accelerator-based source of high-energy neutrons, with applications in fundamental and applied nuclear science and engineering. However, the breakup mechanism remains poorly understood, and…
Polarized targets evolved into indispensable tools in particle and nuclear physics. However, the polarized solid target is degraded by high-intense beam irradiation, known as radiation damage due to target heating and radical generation. We…
We study the effect of deuteration and annealing on the fluorescence spectrum shape and VUV to visible conversion efficiency of TPB films in a polystyrene matrix with input light from 120 to 220 nm. We observed no discernible difference in…
A frozen spin polarized deuteron target cooled by the 3He/4He dilution refrigerator is described. Fully deuterated 1,2-propanediol was used as a target material. Deuteron vector polarization about 40% was obtained for the target in the…
Recent publications have described a method for stand-off optical detection of explosives using resonant infra-red photothermal imaging. This technique uses tuned lasers to selectively heat small particles of explosive lying on a substrate…
Structural and electronic properties of homogeneous poly(3-Hexylthiophene) (P3HT) films ob- tained from the electro-spray method were presented by means of grazing incidence x-ray diffrac- tion, atomic force microscopy, optical absorption,…
We report on the fabrication and use of deuterated polyethylene (dPE) as a coating material for ultra-cold neutron (UCN) storage and transport. The Fermi potential has been determined to be 214~neV and the wall loss coefficient $\eta$ is…
Proof-of-principle experiments have demonstrated an electrostatic field evaporation based deuterium ion source for use in compact, high-output deuterium-tritium neutron generators. The ion source produces principally atomic deuterium and…
Metal hydrides have earlier been suggested for utilization in solar cells. With this as a motivation we have prepared thin films of yttrium hydride by reactive magnetron sputter deposition. The resulting films are metallic for low partial…