Related papers: SiC Cantilevers For Generating Uniaxial Stress

Silicon carbide (SiC) excels in its outstanding mechanical properties, which are widely studied in Microelectromechanical systems (MEMS). Recently, the mechanical tuning of color centers in 4H-SiC has been demonstrated, broadening its…

Silicon carbide (SiC) exhibits excellent material properties attractive for broad applications. We demonstrate the first SiC optomechanical microresonators that integrate high mechanical frequency, high mechanical quality, and high optical…

We present an extensive study of 4H-SiC nanomechanical resonators electrochemically etched out of a monocrystalline wafer. Combining piezo-driven interferometric determination of the mechanical spectra with scanning-laser-Doppler…

We demonstrate photonic devices based on standard 3C SiC epitaxially grown on silicon. We achieve high optical confinement by taking advantage of the high stiffness of SiC and undercutting the underlying silicon substrate. We demonstrate a…

Silicon carbide (SiC) recently emerged as a promising photonic and quantum material owing to its unique material properties. Here, we carry out an exploratory investigation of the electro-optic effect in high-quality-factor 4H-SiC…

We present the very first demonstration of a maser utilizing silicon vacancies (VSi) within 4H silicon carbide (SiC). Leveraging an innovative feedback-loop technique, we elevate the resonator's quality factor, enabling maser operation even…

The realization of ultrahigh quality (Q) resonators regardless of the underpinning material platforms has been a ceaseless pursuit, because the high Q resonators provide an extreme environment of storage of light to enable observations of…

Silicon carbide (SiC) has great potential for optomechanical applications due to its outstanding optical and mechanical properties. However, challenges associated with SiC nanofabrication have constrained its adoption in optomechanical…

High resolution resistors capable of detecting minuscule currents are vital for advanced sensors, but existing off-shelf models struggle with inconsistent resistance under varying voltages. The underlying physics of this issue is rooted in…

A new linac using superconducting quarter-wave resonators (QWR) is under construction at CERN in the framework of the HIE-ISOLDE project. The QWRs are made of niobium sputtered on a bulk copper substrate. The working frequency at 4.5 K is…

In ion cancer therapy, high-intensity ion beams are used to treat tumors by taking advantage of the Bragg-Peak. Typical ion therapy centers use particle rates up to $10^{10}$ ions/second for treatment. On the other hand, such intensities…

For decades, mechanical resonators with high sensitivity have been realized using thin-film materials under high tensile loads. Although there have been remarkable strides in achieving low-dissipation mechanical sensors by utilizing high…

The design and engineering of photonic architectures, suitable to enhance, collect and guide light on chip is needed for applications in quantum photonics and quantum optomechanics. In this work we apply a Faraday cage based oblique angle…

The unique electrical and material properties of 4H-silicon-carbide (4H-SiC) make it a promising candidate material for high rate particle detectors. In contrast to the ubiquitously used silicon (Si), 4H-SiC offers a higher carrier…

The applications of nanomechanical resonators range from biomolecule mass sensing to hybrid quantum interfaces. Their performance is often limited by internal material damping, which can be greatly reduced by using crystalline materials.…

To meet high radiation challenge for detectors in future high-energy physics, a novel 3D 4H-SiC detector was investigated. SiC detectors could potentially operate in radiation harsh and room temperature environment because of its high…

We present measurements on nanomechanical resonators machined from Silicon-on-Insulator substrates. The resonators are designed as freely suspended Au/Si beams of lengths on the order of 1 - 4 um and a thickness of 200 nm. The beams are…

Silicon nitride (SiN) mechanical resonators with high quality mechanical properties are attractive for fundamental research and applications. However, it is challenging to maintain these mechanical properties while achieving strong coupling…

The new 1.4 MeV/u front end HSI (HochStromInjektor) of the Unilac accelerates ions with A/q ratios of up to 65 and with beam intensities in emA of up to 0.25 A/q. The maximum beam pulse power is up to 1300 kW. During the stepwise linac…

Silicon carbide (SiC) has become a key player in realization of scalable quantum technologies due to its ability to host optically addressable spin qubits and wafer-size samples. Here, we have demonstrated optically detected magnetic…