Related papers: 20 GHZ Low Noise LLRF System
This work presents a novel reconfigurable architecture for Low Latency Graph Neural Network (LL-GNN) designs for particle detectors, delivering unprecedented low latency performance. Incorporating FPGA-based GNNs into particle detectors…
In this work, a compact model is presented for a 14 nm CMOS-based FinFET Resonant Body Transistor (fRBT) operating at a frequency of 11.8 GHz and targeting RF frequency generation/filtering for next generation radio communication, clocking,…
A polarization-independent reconfigurable frequency selective rasorber (FSR)/absorber with low insertion loss based on diodes is proposed in this paper. The presented structure consists of a lossy layer based on square loops and a bandpass…
This paper presents a low hardware consumption, resolution-configurable, automatically calibrating Gray code oscillator time-to-digital converter (TDC) in Xilinx 16nm UltraScale+, 20nm UltraScale and 28nm Virtex-7 field-programmable gate…
The resolution of low-frequency resistance noise measurements can be increased by amplitude modulation, shifting the spectrum of the resistance fluctuations away from the 1/f noise contributed by measurement instruments. However, commercial…
Three generations of full-custom analog integrated circuits designed for low-power, high-speed sampling of Radio-Frequency (RF) transients in excess of the Nyquist minimum have been developed. These 0.25$\mu m$ CMOS devices are denoted the…
In this paper, we propose and evaluate two novel double-sequence low-resolution frequency synchronization methods in millimeter-wave (mmWave) systems. In our system model, the base station uses analog beams to send the synchronization…
Photonic methods of radio-frequency waveform generation and processing provide performance and flexibility over electronic methods due to the ultrawide bandwidth offered by the optical carriers. However, they suffer from lack of integration…
We demonstrate a hybrid analog+digital electronic lock to stabilize a dynamically tunable rf offset between two lasers. Our method features an 80 MHz capture range, +/- 7 GHz tuning range, frequency agility of 1 MHz/microsecond, and low…
Emerging applications in the IoT domain require ultra-low-power and high-performance end-nodes to deal with complex near-sensor-data analytics. Domains such as audio, radar, and Structural Health Monitoring require many computations to be…
Historically employed spectroscopic architectures used for large field of view mapping spectroscopy in millimetere and sub-millimetre astronomy suffer from significant drawbacks. On-chip filterbank spectrometers are a promising technology…
Deploying Large Language Models (LLMs) efficiently on edge devices is often constrained by limited memory capacity and high power consumption. Low-bit quantization methods, particularly ternary quantization, have demonstrated significant…
The measurement of the close-to-the-carrier noise of rf and microwave devices is a relevant issue in time and frequency metrology and in some fields of electronics, physics and optics. While phase noise is the main concern, amplitude noise…
Scaling up Large Language Model(LLM) training involves fitting a tremendous amount of training parameters across a limited number of workers. However, methods like ZeRO-3 that drastically reduce GPU memory pressure often incur heavy…
Few-layer phosphorene MOSFETs with 0.3-um-long gate and 15-nm-thick Al2O3 gate insulator was found to exhibit a forward-current cutoff frequency of 2 GHz and a maximum oscillation frequency of 8 GHz after de-embedding for the parasitic…
This paper presents a low power, low cost transceiver architecture to implement radar-on-a-chip. The transceiver comprises of a full ultra-wideband (UWB) transmitter and a full UWB band receiver. A design methodology to maximize the tuning…
A key distinguishing feature of single flux quantum (SFQ) circuits is that each logic gate is clocked. This feature forces the introduction of path-balancing flip-flops to ensure proper synchronization of inputs at each gate. This paper…
The task of this work was to design and later produce a low-power (single supply 5 - 30 V, dual supply +-2.5 V and +-15 V) rail-to-rail operational amplifier aRD820 with low voltage noise (<4 uV, p-p. 0.1 to 10 Hz), ultralow input bias…
The KEK Accelerator Test Facility (ATF) is a dedicated testbed for nanobeam technologies in support of the International Linear Collider (ILC). Stable pulsed operation requires synchronization of the facility timing system with the…
We present a complete top-down design of a low-power multi-channel clock recovery circuit based on gated current-controlled oscillators. The flow includes several tools and methods used to specify block constraints, to design and verify the…