Related papers: Synthesized multiwall MoS2 nanotube and nanoribbon…

Monolayer molybdenum disulfide (MoS$_2$) nanosheets, obtained via chemical vapor deposition onto SiO$_2$/Si substrates, are exploited to fabricate field-effect transistors with n-type conduction, high on/off ratio, steep subthreshold slope…

We study field effect transistor characteristics in etched single layer MoS2 nanoribbon devices of width 50nm with ohmic contacts. We employ a SF6 dry plasma process to etch MoS2 nanoribbons using low etching (RF) power allowing very good…

The transition-metal dichalcogenides (TMD) MoS2 and WS2 show remarkable electromechanical properties. Strain modifies the direct band gap into an indirect one, and substantial strain even induces an semiconductor-metal transition. Providing…

For the first time, n-type few-layer MoS2 field-effect transistors with graphene/Ti as the hetero-contacts have been fabricated, showing more than 160 mA/mm drain current at 1 {\mu}m gate length with an on-off current ratio of 107. The…

Substantial progress on field effect transistors "FETs" consisting of semiconducting single wall carbon nanotubes "s-SWNTs" without detectable traces of metallic nanotubes and impurities is reported. Nearly perfect removal of metallic…

Short channel (~80 nm) n-type single-walled carbon nanotube (SWNT) field-effect transistors (FETs) with potassium (K) doped source and drain regions and high-k gate dielectrics (ALD HfO2) are obtained. For nanotubes with diameter ~ 1.6 nm…

Two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs) are good candidates for high-performance flexible electronics. However, most demonstrations of such flexible field-effect transistors (FETs) to date have been on…

We study the optical properties of MoS$_2$ nanotubes (NTs) with walls comprising dozens of monolayers. We reveal strong peaks in micro-photoluminescence ($\mu$-PL) spectra when detecting the light polarized along the NT axis. We develop a…

We report the realization of field-effect transistors (FETs) made with chemically synthesized multilayer 2D crystal semiconductor MoS2. Electrical properties such as the FET mobility, subthreshold swing, on/off ratio, and contact resistance…

Molybdenum disulfide (MoS2) nanosheet, one of two dimensional (2D) semiconductors, has recently been regarded as a promising material to break through the limit of present semiconductors including graphene. However, its potential in carrier…

Using density functional theory, the electronic structures of single walled molybdenum disulfide nanotubes (MoS$_2$ NTs) were investigated as a function of diameter. Our calculations show that the electronic structure near the band gap is…

Single- and multi-walled molybdenum disulfide (MoS$_2$) nanotubes have been coaxially grown on small diameter boron nitride nanotubes (BNNTs) which were synthesized from heteronanotubes by removing single-walled carbon nanotubes (SWCNTs),…

Monolayer Molybdenum Disulfide (MoS2) with a direct band gap of 1.8 eV is a promising two-dimensional material with a potential to surpass graphene in next generation nanoelectronic applications. In this letter, we synthesize monolayer MoS2…

We study the channel width scaling of back-gated MoS2 metal-oxide-semiconductor field-effect transistors (MOSFETs) from 2 {\mu}m down to 60 nm. We reveal that the channel conductance scales linearly with channel width, indicating no evident…

Ferroelectric field-effect transistors (FeFET) with two-dimensional (2D) semiconductor channels are promising low-power, embedded non-volatile memory (NVM) candidates for next-generation in-memory computing. However, the performance of…

As silicon transistors scale toward future technology nodes, three-dimensional architectures -- including gate-all-around (GAA) nanoribbon and complementary field-effect transistors (CFETs) -- require channel widths in the tens of…

Atomically thin semiconducting MoS2 is of great interest for high-performance flexible electronic and optoelectronic devices. Initial measurements using back-gated field-effect transistor (FET) structures on SiO2 yielded mobility of 1-50…

The successful detection of biomolecules by a Field Effect Transistor-based biosensor (BioFET) is dictated by the sensor's intrinsic Signal-to-Noise Ratio (SNR). The detection limit of a traditional BioFET is fundamentally limited by…

Low-dimensional materials such as layered semiconductors or carbon nanotubes (CNTs) have been attracting increasing attention in the last decades due to their inherent scaling properties, which become fundamental to sustain the scaling in…

In this study, InSb nanowires have been formed by electrodeposition and integrated into NW-FETs. NWs were formed in porous anodic alumina (PAA) templates, with the PAA pore diameter of approximately 100 nm defining the NW diameter.…