Related papers: Metal-Gated Junctionless Nanowire Transistors

Junctionless transistors made of silicon have previously been demonstrated experimentally and by simulations. Junctionless devices do not require fabricating an abrupt source-drain junction and thus can be easier to implement in aggressive…

In this paper, we demonstrate by simulation the feasibility of electrostatically doped and therefore reconfigurable planar field-effect-transistor (FET) structure which is based on our already fabricated and published Si-nanowire (SiNW)…

High performance enhancement mode semiconducting carbon nanotube field-effect transistors (CNTFETs) are obtained by combining ohmic metal-tube contacts, high dielectric constant HfO2 films as gate insulators, and electrostatically doped…

Short channel (~80 nm) n-type single-walled carbon nanotube (SWNT) field-effect transistors (FETs) with potassium (K) doped source and drain regions and high-k gate dielectrics (ALD HfO2) are obtained. For nanotubes with diameter ~ 1.6 nm…

Gate-all-around Vertical Nanowire Field Effect Transistors (VNWFET) are emerging devices, which are well suited to pursue scaling beyond lateral scaling limitations around 7nm. This work explores the relative merits and drawbacks of the…

In this work, we demonstrate a silicon nanocrystal Field Effect Transistor (ncFET). Its operation is similar to that of a Tunnelling Field Effect Transistor (TFET) with two barriers in series. The tunnelling barriers are fabricated in very…

State-of-the-art carbon nanotube field-effect transistors (CNFETs) behave as Schottky barrier (SB)-modulated transistors. It is known that vertical scaling of the gate oxide significantly improves the performance of these devices. However,…

In this paper, we demonstrate by simulation the general usability of an electrostatically doped and electrically reconfigurable planar field-effect transistor (FET) structure. The device concept is partly based on our already published and…

We report on the first realization of Nb-based \textit{all-metallic} gated Dayem nano-bridge field-effect transistors (Nb-FETs). These Josephson devices operate up to a temperature of $\sim 3$ K, and exhibit full suppression of the…

In this article, we present a configurable field-effect transistor (FET), where not only polarity (n- and p-type), but the conduction mechanism of a FET can also be configured dynamically. As a result, we can have both types of devices,…

Electrostatically Formed Nanowire (EFN) based transistors have been suggested in the past as gas sensing devices. These transistors are multiple gate transistors in which the source to drain conduction path is determined by the bias applied…

The continuous miniaturisation of metal-oxide-semiconductor field-effect transistors (MOSFETs) from long- to short-channel architectures has advanced beyond the predictions of Moore's Law. Continued advances in semiconductor electronics,…

Traditional silicon binary circuits continue to face challenges such as high leakage power dissipation and large area of interconnections. Multiple-Valued Logic (MVL) and nano devices are two feasible solutions to overcome these problems.…

In this paper, we present experimental results and simulation data of an electrostatically doped and therefore voltage-programmable, planar, CMOS-compatible field-effect transistor (FET) structure. This planar device is based on our…

Electrostatically tunable Josephson field-effect transistors (JoFETs) are one of the most desired building blocks of quantum electronics. JoFET applications range from parametric amplifiers and superconducting qubits to a variety of…

An important consideration in miniaturizing transistors is maximizing the coupling between the gate and the semiconductor channel. A nanowire with a coaxial metal gate provides optimal gate-channel coupling, but has only been realized for…

High performance p- and n-type single-walled carbon nanotube (SWNT) field-effect transistors (FETs) are obtained by using high and low work function metals, Pd and Al as source/drain (S/D) electrodes respectively. Ohmic contacts made to…

In this work, we simulate the expected device performance and the scaling perspectives of Carbon nanotube Field Effect Transistors (CNT-FETs), with doped source and drain extensions. The simulations are based on the self-consistent solution…

We have fabricated air-stable n-type, ambipolar carbon nanotube field effect transistors (CNFETs), and used them in nanoscale memory cells. N-type transistors are achieved by annealing of nanotubes in hydrogen gas and contacting them by…

Most carbon nanotube field-effect transistors (CNTFETs) directly attach metal source/drain contacts to an intrinsic nanotube channel. When the gate oxide thickness is reduced, such transistors display strong ambipolar conduction, even when…