Related papers: A Microcantilever-based Gas Flow Sensor for Flow R…
We consider a cantilevered (clamped-free) beam in an axial potential flow. Certain flow velocities may bring about a bounded-response instability in the structure, termed {\em flutter}. As a preliminary analysis, we employ the theory of…
We demonstrate AFM imaging with a microcantilever force transducer where an integrated superconducting microwave resonant circuit detects cantilever deflection using the principles of cavity optomechanics. We discuss the detector…
A novel direct approach to detect the resin flow front during the Liquid Resin Infusion process under industrial environment is proposed. To detect the resin front accurately and verify the results, which are deduced from indirect…
We use the principles of cavity optomechanics to design a resonant mechanical force sensor for atomic force microscopy. The sensor is based on a type of electromechanical coupling, dual to traditional capacitive coupling, whereby the motion…
The sensitivity of mechanical resonators to physical quantities such as acceleration, pressure, mass and temperature enables them to underpin sensing and metrology applications. Here, we observe that the resonance frequency of a…
This work focuses on the stability analysis of an Euler Bernoulli cantilever beam with a tip mass at the free end, subject to a follower force. This can serve as a viable model for analysis of elastic instability occurring due to…
Very recently, To et al.~have experimentally explored granular flow in a cylindrical silo, with a bottom wall that rotates horizontally with respect to the lateral wall \cite{Kiwing2019}. Here, we numerically reproduce their experimental…
Estimating the direction of ambient fluid flow is key for many flying or swimming animals and robots, but can only be accomplished through indirect measurements and active control. Recent work with tethered flying insects indicates that…
In this article, we have developed a computational model to determine the droplet formation regime and its transition in a square microfluidic flow-focusing device that eventually dictate the droplet shape, size, and its formation…
A force measurement technique has been developed that utilizes a clamped fiber optic element both as a cantilever and as a highly sensitive probe of the static and dynamic displacement of a sample that is mounted near its free end. Light…
A pinned-free beam in axial fluid flow, subjected to feedback-based actuation at the pinned end, is investigated. The actuation may be a moment or a prescribed angle and it is proportional to the state (curvature, slope, or displacement) of…
An ambient energy harvesting device was design and fabricated. It can harness kinetic energy of rain droplets and low velocity wind flows. The energy converted into electrical energy by using a single device. The technique used by the…
The behaviour of a miniature calorimetric sensor, which is under consideration for catheter-based coronary artery flow assessment, is investigated in both steady and pulsatile tube flow. The sensor is composed of a heating element operated…
Fabrication of the bimorph lithium niobate cantilevers involves a micro machining of a z-cut wafer to create a multidomain structure. After etching, the bimorph ferroelectric cantilevers are fabricated at the locations near interdomain…
We consider a canonical flow-structure system modeling airflow over a cantilevered beam. Flow-beam interactions arise in flight systems as well as alternative energy technologies, such as piezoelectric energy harvesters. A potential flow,…
In this paper, a novel fully 3D, microfluidic-oriented, gel-based, and low-cost highly stretchable resistive sensors have been presented. By the proposed method we are able to measure and discriminate all of the stretch, twist, and pressure…
In optical detection setups to measure the deflection of micro-cantilevers, part of the sensing light is absorbed, heating the mechanical probe. We present experimental evidences of a frequency shift of the resonant modes of a cantilever…
Single-chip CMOS-based biosensors that feature microcantilevers as transducer elements are presented. The cantilevers are functionalized for the capturing of specific analytes, e.g., proteins or DNA. The binding of the analyte changes the…
Mechanical properties of biological samples have been imaged with a \textit{Force Feedback Microscope}. Force, force gradient and dissipation are measured simultaneously and quantitatively, merely knowing the AFM cantilever spring constant.…
In this paper we present the developments in heat flux measurements using gradient heat flux sensors (GHFS). The GHFS is a sensor made of artificially created material with anisotropic thermo-electrical properties. Its properties including…