Related papers: A Microcantilever-based Gas Flow Sensor for Flow R…
Squeeze film pressure sensors, exploiting the dynamical modification of the mechanical properties of oscillating elements due to the compression of a fluid in a small gap region, allow for direct and absolute pressure measurements. This…
Using a thermodynamic approach based upon the fluctuation-dissipation theorem we quantify the stochastic dynamics of rectangular and V-shaped microscale cantilevers immersed in a viscous fluid. We show that the stochastic cantilever…
The gas flow characteristics in lid-driven cavities are influenced by several factors, such as cavity geometry, gas properties, and boundary conditions. In this study, the physics of heat and gas flow in cylindrical lid-driven cavities with…
The liquid cone-jet mode can be produced upon stimulation by a co-flowing gas sheath. Most applications deal with the jet breakup, leading to either of two droplet generation regimes: jetting and dripping. The cone-jet flow pattern is…
Graphene flow sensors hold great prospects for applications, but also encounter many difficulties, such as unwanted electrochemical phenomena, low measurable signal and limited dependence on the flow direction. This study proposes a novel…
We report on the piezoresistive method for detecting stability loss events in microelectromechanical (MEMS) sensors based on bifurcation. The method involves measuring the resistivity changes of an entire beam to detect snap-through…
Micropumps are one of the most important parts of a microfluidic system. In particular, for biomedical applications such as Lab-on-Chip systems, micropumps are used to transport and manipulate test fluids in a controlled manner. In this…
In the context of the ultrasonic determination of mechanical properties, it is common to use oblique incident waves to characterize fluid-immersed anisotropic samples. The lateral displacement of the ultrasonic field owing to leaky guided…
We propose to search for millicharged particles produced in high-intensity electron beam dumps using small ultralow-threshold sensors. As a concrete example, we consider a Skipper-CCD placed behind the beam dump in Hall A at Jefferson Lab.…
This study introduces a new approach to optimize the geometrical parameters of pipe diffusers in centrifugal compressors for Micro Gas Turbines, tailored for a 100 kW unit. The methodology draws insights from optimized airfoil-type…
Arrays of H-shape microfluidic channels connecting two different fluidic reservoirs have been built with silicon/SU8 microfabrication technologies utilized in production of thermal inkjet printheads. The fluids are delivered to the channels…
The pressure-driven flow of a suspension of spinning particles in a rectangular channel is studied using an acoustic method. The suspension is made of insulating particles (PMMA) dispersed in a slightly conducting oil (Ugilec + Dielec) and…
This paper presents a bio-inspired underwater whisker sensor for robust hydrodynamic disturbance detection and efficient signal analysis based on Physical Reservoir Computing (PRC). The design uses a tapered nylon spring with embedded…
We report on progress in developing compact sensors for atomic force microscopy (AFM), in which the mechanical transducer is integrated with near-field optical readout on a single chip. The motion of a nanoscale, doubly-clamped cantilever…
Precisely measuring pressure in microfluidic flows is essential for flow control, fluid characterization, and monitoring, but faces specific challenges such as \RE{achieving} sufficient resolution, non-invasiveness, or ease of use. Here, we…
This paper explores the fluid-elastic response of a cantilevered flexible sheet in the presence of uniform airflow. The leading edge of the sheet is clamped, while at the trailing edge, in-plane tension is applied to provide additional…
This article describes the design and manufacturing of a microfluidic chip, allowing for the actuation of a gas-liquid interface and of the neighboring fluid. A first way to control the interface motion is to apply a pressure difference…
The operation of gas detectors is often limited by secondary effects, originating from avalanche-induced photons and ions. Ion backflow is one of the effects limiting the operation of a gas detector at high flux, by giving rise to space…
This study has successfully demonstrated a novel self-heating formaldehyde gas sensor based on a thin film of NiO sensing layer. A new fabrication process has been developed in which the Pt micro heater and electrodes are deposited directly…
We present a "nanoladder" geometry that minimizes the mechanical dissipation of ultrasensitive cantilevers. A nanoladder cantilever consists of a lithographically patterned scaffold of rails and rungs with feature size $\sim$ 100 nm.…