Related papers: Au-SN Flip-Chip Solder Bump for Microelectronic an…
Electrostatic gates are of paramount importance for the physics of devices based on high-mobility two-dimensional electron gas (2DEG) since they allow depletion of electrons in selected areas. This field-effect gating enables the…
Scandium-doped aluminum nitride (AlScN) with an asymmetric hexagonal wurtzite structure exhibits enhanced second-order nonlinear and piezoelectric properties compared to aluminum nitride (AlN), while maintaining a relatively large bandgap.…
We propose a scalable design for a spin-photon interface to a color center in a diamond microdisk. The design consists of a silicon oxynitride hexagonal lattice overlaid on a diamond microdisk to enable vertical emission from the microdisk…
Al/Ni multilayers have been prepared by repeated folding and cold rolling (F&R) of elemental foils. The thickness of Al and Ni foils is reduced down to less than 50 nm after fifty F&R cycles. Three-dimensional atom probe analyses clearly…
This work addresses the two great challenges of the spark plasma sintering (SPS) process: the sintering of complex shapes and the simultaneous production of multiple parts. A new controllable interface method is employed to concurrently…
The kinetics of intrinsic and dopant-enhanced solid phase epitaxy (SPE) are stud- ied in buried amorphous Si (a-Si) layers in which SPE is not retarded by H. As, P, B and Al profiles were formed by multiple energy ion implantation over a…
Spiky/hollow metal nanoparticles have applications across a broad range of fields. However, current bottom-up methods to produce spiky/hollow metal nanoparticles rely heavily on the use of strongly adsorbing surfactant molecules, which is…
Achieving tunability of two dimensional (2D) transition metal dichalcogenides (TMDs) functions calls for the introduction of hybrid 2D materials by means of localized interactions with zero dimensional (0D) materials. A metal-semiconductor…
The results of scanning tunneling microscopy experiments using iron-coated tungsten tips and current-carrying bismuth selenide ($Bi_2Se_3$) samples are reported. Asymmetry in tunneling currents with respect to the change in the direction of…
Innovation in biomaterials has brought both breakthroughs and new challenges in medicine, as implant materials have become increasingly multifunctional and complex. One of the greatest issues is the difficulty in assessing the temporal and…
Bimetallic nanoparticles are often superior candidates for a wide range of technological and biomedical applications, thanks to their enhanced catalytic, optical, and magnetic properties, which are often better than their monometallic…
Artificially created two-dimensional (2D) interfaces or structures are ideal for seeking exotic phase transitions due to their highly tunable carrier density and interfacially enhanced many-body interactions. Here, we report the discovery…
While ultrafast laser welding is an appealing technique for bonding transparent workpieces, it is not applicable for joining silicon samples due to nonlinear propagation effects which dramatically diminishes the possible energy deposition…
Metallic gratings were fabricated using high energy laser interference lithography with a frequency tripled Nd:YAG nanosecond laser. The grating structures were first recorded in a photosensitive layer and afterwards transferred to an Au…
We report experiments on surface nanopatterning of Si targets which are irradiated with 2 keV Ar + ions impinging at near-glancing incidence, under concurrent co-deposition of Au impurities simultaneously extracted from a gold target by the…
Acoustic tweezers comprising a surface acoustic wave chip and a disposable silicon microfluidic chip are potentially advantageous to stable and cost-ffective acoustofluidic experiments while avoiding the cross-contamination by reusing the…
We show here for the first time the use of a cold sintering process (CSP) to sinter CoSb3-based thermoelectric materials. CSP at 150 {\deg}C for 90 min under a uniaxial pressure of 750 MPa yields pieces with a relative density of 86 %,…
We report on the development of some process capabilities for a polymer-based, multi-layer microelectrofluidic platform, namely: the hot embossing process, metallization on polymer and polymer bonding. Hot embossing experiments were…
This work presents a scalable method to produce robust all-solid electric double layer capacitors (EDLCs), compatible with roll-to-roll processes and structural laminate composite fabrication. It consists in sandwiching and pressing an…
Trapped-ion quantum computing requires precise optical control for individual qubit manipulation. However, conventional free-space optics face challenges in alignment stability and scalability as the number of qubits increases. Integrated…