Related papers: An Improved Process for Fabricating High-Mobility …

In this paper we describe a stretchable solid-state electronic switching material that operates at high voltage potentials, as well as a switch material benchmarking technique that utilizes a modular dielectric elastomer (artificial muscle)…

Using accurate dissipative DFT-NEGF atomistic-simulation techniques within the Wannier-Function formalism, we give a fresh look at the possibility of sub-10 nm scaling for high-performance CMOS applications. We show that a combination of…

In this manuscript, we present a field effect transistor with a channel consisting of a two-dimensional electron gas located at the interface between an ultrathin metallic film of Ni and a p-type Si(111) substrate. We have demonstrated that…

We propose a semi-suspended device structure and construct nanogapped, hysteresis-free field-effect transistors (FETs), based on the van der Waals stacking technique. The structure, which features a semi-suspended channel above a…

Field-effect transistors (FETs) with non-covalently functionalised molybdenum disulfide (MoS2) channels grown by chemical vapour deposition (CVD) on SiO2 are reported. The dangling-bond-free surface of MoS2 was functionalised with a…

The bandgap dependence on the number of atomic layers of some families of 2D-materials, can be exploited to engineer and use lateral heterostructures (LHs) as high-performance Field-Effect Transistors (FET). This option can provide very…

Highly flexible electromagnetic interference (EMI) shielding material with excellent shielding performance is of great significance to practical applications in next-generation flexible devices. However, most EMI materials suffer from…

We report field-effect transistors (FETs) with single-crystal molybdenum disulfide (MoS2) channels synthesized by chemical vapor deposition (CVD). For a bilayer MoS2 FET, the mobility is ~17 cm2V-1s-1 and the on/off current ratio is ~108,…

High-quality FeSe tapes have been prepared by using a diffusion method. By adjusting the reaction temperature and the thickness systematically, a transport critical current density as high as 600 A/cm2 at 4.2 K under self field is achieved.…

Stabilized FeSe thin films in ambient pressure with tunable superconductivity would be a promising candidate for superconducting electronic devices yet its superconducting transition temperature (Tc) is below 10 K in bulk materials. By…

Transistors operating at high frequencies are the basic building blocks of millimeter-wave communication and sensor systems. The high velocity and mobility of carriers in graphene can open way for ultra-fast group IV transistors with…

Mechanical exfoliation of bulk crystals has been widely used to obtain thin topological insulator (TI) flakes for device fabrication. However, such a process produces only micro-sized flakes that are highly irregular in shape and thickness.…

Organic light emitting field effect transistors (OLEFETs) with bilayer structures have been widely studied due to their potential to integrate high-mobility organic transistors and efficient organic light emitting diodes. However, these…

The use of SrTiO$_3$ dielectrics as high-permittivity insulator in organic thin film field effect transistors (FET) is evaluated. Field-effect transistors with sputtered SrTiO$_3$ and copper-phthalocyanine (CuPc) as semiconducting layer…

In this work, we report on the electronic properties of solution-gated field effect transistors (SGFETs) fabricated using large-area graphene. Devices prepared both with epitaxially grown graphene on SiC as well as with chemical vapor…

Research on organic thin-film transistors tends to focus on improvements in device performance, but very little is understood about the ultimate limits of these devices, the microscopic physical mechanisms responsible for their limitations,…

Developing sustainable battery electrode manufacturing methods is particularly pressing for alloying-type active materials, such as silicon, which often require additional energy-intensive and solvent-based processing to reinforce them with…

Graphdiyne (GDY) is recognized as a compelling candidate for the fabrication of next-generation high-speed low-energy electronic devices due to its inherent p-type semiconductor characteristics. However, the development of GDY for…

Fabrication techniques such as laser patterning offer excellent potential for low cost and large area device fabrication. Conductive polymers can be used to replace expensive metallic inks such as silver and gold nanoparticles for printing…

We report on a modified transfer technique for atomically thin materials integrated onto microelectromechanical systems (MEMS) for studying strain physics and creating strain-based devices. Our method tolerates the non-planar structures and…